The C-900u is a solid-state control amplifier from Luxman of Japan and was the flagship of its preamplifier range until the C-10X replaced it, which Luxman describes as its first model upgrade in 10 years. A balanced amplification circuit of four independent modules, the new LECUA 1000 attenuator and the ODNF 4.0 feedback circuit are its main elements.
Key specs that matter
Input sensitivity and impedance are 255 mV / 43 kohms unbalanced and 255 mV / 86 kohms balanced. Rated output is 1 V at 90 ohms (max. 11 V) unbalanced and 1 V at 180 ohms (max. 22.5 V) balanced, and gain is 12 dB. Frequency response is 20 Hz - 20 kHz (+0, -0.1 dB) and 5 Hz - 120 kHz (+0, -3 dB). THD from 20 Hz to 20 kHz is 0.009% unbalanced and 0.005% balanced. S/N (IHF-A) is 123 dB unbalanced and 126 dB balanced. Tone controls give ±8 dB at 100 Hz (bass) and 10 kHz (treble). Power consumption is 42 W, or 2.2 W in standby. Its case measures 440 x 130 x 430 mm and weighs 19.7 kg.
Engineering and use context
In the balanced circuit, four independent modules amplify the hot and cold components of the left and right channels separately, and Luxman states that this suppresses unnecessary noise generation. LECUA 1000 is a stepped fixed-resistance attenuator. In this new version the number of steps rises from 72 to 88, and four LECUA 1000 units run in parallel.
In the first main amplifier stage the ODNF 4.0 circuit is quadruple-paralleled, for an increased primary slew rate and ultra-wide bandwidth. Power comes from a CI-type transformer with a capacity equivalent to that of the B-1000f monaural power amplifier. The C-900u sits in a highly rigid loopless chassis that avoids ground loops, on cast-iron isolator legs intended to prevent resonance.
Tone controls are electronically tuned. Other functions are left and right balance, a loudness function, balanced phase presets set for each input, line straight, mute and a fluorescent display with a dimmer and a zoom mode that enlarges the readout four times. If needed, the balanced output circuit can be used as a second pair of unbalanced outputs. The lightweight aluminium RA-20 remote control is supplied.
Pairing
An external pre-amplifier input allows connection to an AV system. Power amplifiers with balanced or unbalanced inputs connect directly.
Alternatives
The Luxman C-10X is the newer flagship control amplifier, with LECUA-EX volume control in 192 steps and LIFES feedback.