The XP-A1500 MKII is a solid-state stereo power amplifier from Extraudio, a company that has designed high-end audio systems in the Netherlands since 2008. This MKII version was made from 2018 to 2020 and is now listed among Extraudio's discontinued products. According to Extraudio, owners can still have it updated to the 2022 model through an official distributor or the factory. Its front panel carries a single power button, and every other function is controlled by software inside the amplifier.
Key specs that matter
Output power is 1500 W x2 into 8 ohms and 2400 W x2 into 4 ohms. Peak output current is 90 A per channel, 180 A in total. Damping factor is above 1000 (8 ohm load, 1 kHz and below), and voltage gain is 28 dB. Frequency response is 2 Hz - 110 kHz (+0 dB), noise floor is -160 dB, dynamic range is above 120 dBA, and THD+N is 0.003% (1 kHz, 1 W). Inputs are one pair of unbalanced RCA and one pair of balanced XLR, with an input impedance of 7.2 kohms balanced and 3.6 kohms single-ended. Power consumption is 0.5 W in standby and 19 W at idle, on 115 or 230 V AC. Dimensions are 440 x 120 x 400 mm (W x H x D), and weight is 18 kg.
Engineering and use context
Two fully separate monophonic power stages with balanced inputs make this a fully balanced, dual-mono design with a dual power supply. On both the RCA and the XLR inputs, a pure Class A buffer with BJT transistor input stages comes first. Its output stage uses two Extraudio EPAM amplification modules. Two power supplies of 1500 W peak each are installed, and the power supply RMS power limit is 1500 W x2. Extraudio's own energy-efficiency control software manages consumption, and the amplifier is Energy Star and ErP 1275/2008/EC compliant. Three EMI and RF filters sit on the AC input. Built-in protection covers temperature, electrical overvoltage, DC and HF.
The chassis is made of solid panels of 6000-series aeronautical aluminium. Black, white or grey paint with a ceramic finish is offered, under one or two coats of High Gloss varnish mixed with bi-component epoxy. WBT speaker connectors and trigger input and output connectors are on the rear panel.
Pairing
A preamplifier with balanced XLR outputs suits the 7.2 kohm balanced input. Extraudio's matching preamplifier from the same period is the XP5. The trigger input allows switch-on from the preamplifier.
Alternatives
The XP-A800 is the smaller Extraudio stereo power amplifier from the same 2018 - 2020 MKII generation.