The XDA-AMP5400RK is a four-zone, eight-channel multi-room amplifier from Yamaha for custom-integrated whole home audio systems. Yamaha designed it as a companion amplifier for the XDA-QS5400RK, to expand speaker coverage or increase output power, and it also expands secondary zones of Yamaha AV receivers that have Zone pre outs. The enclosure is 1U high and rack-wide.
Key specs that matter
Channel configuration is 8 channels (2 channels x 4), and bridged (BTL) connection is possible. Rated output power (1 kHz, 0.9% THD, 2 channels driven) is 50 W into 8 ohms and 90 W into 4 ohms, or 100 W into 8 ohms bridged. With 1 channel driven the figures rise to 100 W into 4 ohms and 200 W into 8 ohms bridged. Dynamic power (20 Hz - 20 kHz, 0.08% THD, 2 channels driven, 20 ms burst) is 40 W into 8 ohms, 80 W into 4 ohms and 150 W bridged. Minimum speaker load is 4 ohms. THD is 0.04% (20 Hz - 20 kHz, 25 W, 8 ohms), frequency response is 5 Hz - 40 kHz (+0/-3 dB) and S/N ratio is 108 dB. Gain is 25.8 dB. Input sensitivity is 150 mV (1 W, 8 ohms) or 1.0 V (50 W, 8 ohms), and maximum input signal is 1 V. Dimensions are 437 x 46 x 443 mm on adhesive feet, or 481 x 44 x 443 mm for rack mount, and weight is 6.0 kg.
Engineering and use context
Amplification is Class D, using ICEpower integrated circuits. To prevent ground loop hum in a rack of connected components, Yamaha uses a differential circuit design. It also has a balanced audio circuit design and PML capacitors, the type used in the AVENTAGE AV separates.
On the rear panel are four RCA inputs, four RCA through outputs, four Euroblock speaker connectors, four trigger inputs and four trigger outputs, and one IR input and one IR output. Its four audio buses can be patched together with the included jumper plugs and cables for different speaker and zone configurations. The audio outputs can alternatively connect powered subwoofers or subwoofer amplifiers. Each of the four amplifier zones is bridgeable. Audio sensing inputs and Auto Power Standby are provided for use without a control system. Removable rack ears, a magnetic faceplate and a detachable AC cable are included.
Pairing
The matching source is the XDA-QS5400RK, whose trigger ports switch individual amplifier zones on and off. Other sources connect through the RCA inputs, such as an AV receiver with Zone pre outs. Passive speakers of 4 ohms or higher are required.
Alternatives
The Yamaha MX-A5200 is an 11-channel AVENTAGE power amplifier with bridge-tied load operation for the two front channels.