Hifiverse

Power amplifiers stereo - Burson Audio Timekeeper

Description, images, technical data and specifications

Burson Audio Timekeeper
Image source - (c) Burson Audio

The Timekeeper is a stereo power amplifier from Burson Audio of Melbourne, Australia, launched in June 2013 at USD 2,600, with a European price of EUR 1,900. It has the same footprint as Burson's Conductor preamplifier and headphone amplifier, and Burson aimed the pair at users who want full-size electronics on a desk. One stereo unit can later be joined by a second Timekeeper, with both switched to bridged mono for higher output.

Key specs that matter

Rated output is 80 W per channel into 8 ohms in stereo, and a single unit bridged to mono delivers 240 W into 8 ohms. THD is 0.03% (1 kHz, 8 ohms), and frequency response is 0 Hz - 50 kHz (±3 dB). Signal-to-noise ratio is above 98 dB at line level. Input sensitivity is 240 mV, with an input impedance of 20 kohms. Its case measures 265 x 255 x 80 mm, and weight is about 8 kg. Maximum power consumption is 300 W, and versions were built for 240 V or 110 V mains.

Engineering and use context

Burson uses an all-discrete class AB circuit with bipolar transistors and no integrated circuits in the audio path. Each channel is on its own board in a dual-mono layout. A custom 300 VA toroidal transformer powers a linear supply with six capacitors totalling 40,000 µF. Burson lists Elna for Audio and Elna Silmic II capacitors and Vishay Dale military-grade resistors with 1% tolerance. Silver anodised aluminium heatsink sections form the case itself, and a temperature-controlled fan sits at the rear.

On the rear panel are two pairs of RCA line inputs for stereo operation, a separate RCA input and an XLR input for bridged mode, and two pairs of speaker binding posts. Bridged mode accepts either RCA or XLR signals.

Pairing

The matching preamplifier is the Burson Conductor, which has the same case size. According to Burson, the pairing supports both RCA and XLR systems. Bridged mono operation requires two units, one per speaker.

Alternatives

The Burson Timekeeper 3X GT is a later dual-mono stereo power amplifier, rated at 110 W per channel into 8 ohms and 180 W into 4 ohms, with the first 30 W in class A.

Specifications

  • Model name

    Timekeeper

  • Input sensitivity (mV)

    240

  • Input impedance (balanced) (Ω)

    20 000

  • Input impedance (single-ended) (Ω)

    20 000

  • Output impedance (balanced) (Ω)

    N/A

  • Output impedance (single-ended) (Ω)

    N/A

  • Max current (A)

    N/A

  • Output power (8Ω) (W)

    80

  • Output power (4Ω) (W)

    N/A

  • Gain (dBu)

    N/A

  • Frequency response low +/- 3dB (Hz)

    0

  • Frequency response high +/- 3dB (Hz)

    50 000

  • Signal to Noise Ratio (dB)

    >98

  • Total Harmonic Distortion + Noise (0% global feedback) (%)

    N/A

  • Total Harmonic Distortion + Noise (100% global feedback) (%)

    <0.03

  • Max power consumption (W)

    300

  • Damping factor

    N/A

  • Dimensions (mm)

    265 x 255 x 80

  • Weight (kg)

    8.0

  • Official link