Hifiverse

Power amplifiers stereo - Ampsandsound Stereo 17

Description, images, technical data and specifications

Ampsandsound Stereo 17
Image source - (c) Ampsandsound

The Stereo 17, also called the Little Nugget, is a tube stereo power amplifier from ampsandsound, the company founded by Justin Weber in Aliso Viejo, California. It was introduced at AXPONA 2026 in Chicago together with the Kenzie Reimagined headphone amplifier and the Badlands preamplifier, priced at USD 6,000. ampsandsound presents it as the return of the ST15, one of its most popular models, which had been retired to make room for higher-power designs.

Key specs that matter

Output power is 17 W RMS per channel, with 22 W peaks at 1 kHz. Each channel uses two EL84 tubes in a push-pull ultralinear output stage, with a 12AX7 at the input and a 12AU7 as the phase splitter. Input impedance is 500 kohms, and 1.6 V is required for full power. Speaker taps are 8 and 4 ohms, with an 8 and 16 ohm combination as an option. Noise is 2.8 mV peak-to-peak. Bandwidth is 10 Hz - 30 kHz (-1 dB) at 1 W, 18 Hz - 20 kHz (-1 dB) at 5 W and 26 Hz - 17 kHz (-1 dB) at 10 W. Its weight is 17.7 kg, or 24 kg shipped in a Seahorse case.

Engineering and use context

This amplifier is based on the Halfer circuit and runs with cathode bias. Power and noise figures depend on tube selection, and a tube set comes with the amplifier. Its chassis is made of 11-gauge steel plate, and a removable tube cage covers the tubes.

All transformers are custom-wound exclusively for ampsandsound. The output transformers use large cores intended to resist saturation. According to the company, the power transformer is nearly twice the size and core weight the unit needs, to allow for 200% duty cycles.

Every ampsandsound amplifier is handmade in Southern California by a small team, with hand-wound output transformers and U.S.-sourced parts. Stock finish is all black, and custom options are available on request.

Pairing

The matching preamplifier is the ampsandsound Stereo Preamplifier. A line-level source or preamplifier with volume control is required. Loudspeakers named by ampsandsound for this model include the JBL L100, KEF LS50, Klipsch Forte, LS3/5a and Harbeth 30.1.

Alternatives

The Black Pearl XL SE is the flagship ampsandsound amplifier, a single-ended design with 300B directly heated triodes.

Specifications

  • Model name

    Stereo 17

  • Input sensitivity (mV)

    N/A

  • Input impedance (balanced) (Ω)

    N/A

  • Input impedance (single-ended) (Ω)

    500 000

  • Output impedance (balanced) (Ω)

    N/A

  • Output impedance (single-ended) (Ω)

    N/A

  • Max current (A)

    N/A

  • Output power (8Ω) (W)

    17

  • Output power (4Ω) (W)

    N/A

  • Gain (dBu)

    N/A

  • Frequency response low +/- 3dB (Hz)

    N/A

  • Frequency response high +/- 3dB (Hz)

    N/A

  • Signal to Noise Ratio (dB)

    N/A

  • Total Harmonic Distortion + Noise (0% global feedback) (%)

    N/A

  • Total Harmonic Distortion + Noise (100% global feedback) (%)

    N/A

  • Max power consumption (W)

    N/A

  • Damping factor

    N/A

  • Dimensions (mm)

    N/A

  • Weight (kg)

    N/A

  • Official link

Related content