Hifiverse

Power amplifiers stereo - SOtM sPA-1000

Description, images, technical data and specifications

SOtM sPA-1000
Image source - (c) SOtM

The sPA-1000 is a stereo power amplifier from the top product line of SOtM, the Korean maker of music servers, USB cards and linear power supplies. Its output stage is a class D amplifier module designed by SOtM itself, not one of the ready-made modules that most class D amplifiers use. The amplifier sells for GBP 3,705 in the UK and AUD 5,500 in Australia.

Key specs that matter

Two channels in bridge-tied-load (BTL) configuration give 200 W per channel into 4 ohms. Frequency response is 20 Hz - 40 kHz, THD+N is below 0.05% (1 W, 8 ohms), and SNR is 103 dB (8 ohms, 2.0 Vrms input). Input sensitivity is 1.84 Vrms. There is one unbalanced and one balanced input, each accepting 2.0 Vrms max with an input impedance above 10 kohms. A 3.5 mm trigger in/out runs at 12 V, 0.2 A max. AC input is 220 - 240 V or 100 - 120 V, 50/60 Hz, at 3 A or 6 A. The chassis measures 360 x 84 x 255 mm and weighs over 7.5 kg.

Engineering and use context

From the input stage to the speaker output stage the circuit is fully balanced, and SOtM states that this rejects noise from inside and outside the unit. A power stabilisation circuit, which the company calls pumping reducer technology, sits in the power supply. It removes the power pumping effect, in which the speaker generates an electromotive force during playback that changes the supply voltage. Further parts of the custom class D design are a high precision amplifier power regulator and a power supply active noise canceller.

Power comes from a high current toroidal transformer. Output short protection and over-temperature protection are built in. On the front panel there is one operating indicator LED and a standby switch, with the AC power switch on the rear. SOtM specifies high-end audio-grade components. SOtM rates operation at +10 to +30 degrees C and storage at 0 to +40 degrees C, at 10 - 90% humidity.

Pairing

A preamplifier or a DAC with volume control is required. Balanced and unbalanced sources both connect. The trigger in/out links power-up with a preamplifier or streamer that has a 12 V trigger.

Alternatives

SOtM has no other stereo power amplifier in its range.

Specifications

  • Model name

    sPA-1000

  • Input sensitivity (mV)

    N/A

  • Input impedance (balanced) (Ω)

    10 000

  • Input impedance (single-ended) (Ω)

    10 000

  • Output impedance (balanced) (Ω)

    N/A

  • Output impedance (single-ended) (Ω)

    N/A

  • Max current (A)

    N/A

  • Output power (8Ω) (W)

    N/A

  • Output power (4Ω) (W)

    200

  • Gain (dBu)

    N/A

  • Frequency response low +/- 3dB (Hz)

    20

  • Frequency response high +/- 3dB (Hz)

    40 000

  • Signal to Noise Ratio (dB)

    N/A

  • Total Harmonic Distortion + Noise (0% global feedback) (%)

    N/A

  • Total Harmonic Distortion + Noise (100% global feedback) (%)

    0.05 at 1 W / 8 Ohm

  • Max power consumption (W)

    N/A

  • Damping factor

    N/A

  • Dimensions (mm)

    360 x 84 x 255

  • Weight (kg)

    7.5

  • Official link