The Solis is a stereo power amplifier in the Rega Reference range, designed and hand-built in England as the partner for the Mercury pre-amplifier. Rega's engineering team spent four years on its circuit, which builds on the clam shell Elicit and Exon amplifier circuits and almost four decades of Rega solid-state amplifier development. It went on sale in November 2024 at GBP 6,950.
Key specs that matter
Output is 168 W RMS per channel into 8 ohms and 305 W RMS per channel into 4 ohms (1 kHz, 0.1% THD, rated 230/120 V supply). THD+N is typically 0.015% at 1 kHz (100 W into 8 ohms, 22 Hz - 22.4 kHz bandwidth). Frequency response is 15 Hz - 30 kHz (-0.5 dB points, 100 W into 8 ohms, unbalanced input). Input sensitivity is 820 mV at 35 kohms unbalanced and 1.64 V at 26 kohms balanced, with 33.3 dB gain. Mains settings are 230, 220, 120 and 100 V nominal (±10%). Consumption is 500 W at 1/8 rated power and 0.4 W in standby. Dimensions are 435 x 140 x 385 mm (W x H x D), and weight is 24.8 kg.
Engineering and use context
Fully symmetrical discrete circuitry is used in the signal path. A differentially driven common base voltage amplifier forms the driver stage, and the cascoded differential input amplifier uses two low noise, LED referenced current generators. Each channel has six Sanken 130 W, 15 A multi-emitter output transistors in a triple high current output stage. ICEL polypropylene capacitors, HTR non-inductive resistors and relays sit in the signal path, with Nichicon audio grade capacitors in bypass and decoupling positions.
Two custom 330 VA toroidal transformers with fully bonded cores work with 40,000 µF of Rega K-Power smoothing capacitors per channel, and Rega quotes an effective doubling of power from 8 to 4 ohms. All supplies use fast recovery rectifier diodes. Input and low-level driver stages run from a regulated symmetrical tracking supply with a low noise voltage reference.
Microcontroller-based slow start, standby and supervisory circuits keep in-rush current to a minimum, and their supply is galvanically isolated from the audio circuits. Protection covers speaker DC, short circuit and temperature, with a thermal cut-out. Standby is user selectable and activates after one hour without signal. Its core circuit is unbalanced, and the XLR inputs use additional circuitry.
Pairing
The matching pre-amplifier is the Mercury, and the Aethos integrated amplifier can also be used as its pre-amplifier. Balanced and unbalanced inputs and a 12 V trigger are provided. Rega recommends unbalanced connections for domestic systems.
Alternatives
Rega offers no other power amplifier besides the Solis.