Power Two is a 200 W class A/B fully balanced stereo power amplifier from Alluxity, the Danish brand of Alexander Vitus-Mogensen, son of Hans-Ole Vitus of Vitus Audio. It is the third solid-state power amplifier from Alluxity, and all engineering, development and manufacturing take place in-house in Herning. US distributor Monarch Systems announced it on 9 November 2020 at USD 7,800, as a less costly option than the larger Power One at USD 10,600. In the UK the price was about GBP 7,650.
Key specs that matter
Rated output is approximately 200 W per channel into 8 ohms, 400 W into 4 ohms and 800 W into 2 ohms (RMS). Inputs are one RCA and one XLR, with 10 kohm input impedance and an input sensitivity of 0.7 Vrms (RCA) and 1.4 Vrms (XLR). Output impedance is 75 milliohms. Each channel has a 600 VA transformer and 40,000 µF of capacitance. Frequency response extends beyond 800 kHz, THD+N is given as 0.01%, and the signal-to-noise ratio is above 100 dB. Power consumption is 45 W with no load. Dimensions are 435 x 105 x 335 mm (W x H x D), and weight is 17.5 kg.
Engineering and use context
Alluxity built the Power Two on the same basic topology as the Int One integrated amplifier, and its output section is derived from the power amplifier portion of that model. All input and amplification circuitry is linear, with no switching or class D circuitry in the audio path. Its input section is differentially balanced and uses discrete gain stages, designed and built in-house by Alluxity to reduce noise and distortion.
Compared with the Power One, which has the same 200 W rating, a 600 VA transformer and 60,000 µF per channel, the Power Two sits in a chassis about 30% shallower. The Power One is 480 mm deep and weighs 31 kg. Casework is machined from a solid billet of aluminium. Control and status are shown on a full-colour, front-panel 5-inch touch screen with 800 x 480 pixel resolution.
Standard finishes are black, white, titanium (grey) and titanium orange. Custom colours are available for an additional fee.
Pairing
The matching preamplifier is the Pre Two streaming preamplifier. A preamplifier with an RCA or XLR output is required. The XLR by-amp output of the Pre Two allows bi-amping with a second Power Two.
Alternatives
Alluxity's Power One is the larger stereo power amplifier, with the same 200 W rating in a 480 mm deep chassis.