Hifiverse

Power amplifiers stereo - Proficient Audio PAS-A4100

Description, images, technical data and specifications

Proficient Audio PAS-A4100
Image source - (c) Proficient Audio

The PAS-A4100 is a four-channel analog filtering amplifier from Proficient Audio, a brand of Nice North America of Carlsbad, California. It is designed and engineered in the USA and made in China, and Proficient specifies it for distributed audio and home entertainment installations. The single rack-mount chassis takes one rack space (1U), and the warranty is two years on parts and labour.

Key specs that matter

Output is up to 100 W per channel peak and over 70 W per channel continuous into 8 ohms with all channels driven, and the power nearly doubles into 4 ohms. Bridged pairs deliver 200 W rated into 8 ohms, for layouts of 2 x 200 W, 2 x 100 W + 1 x 200 W or 4 x 100 W. Maximum load is three 8-ohm speakers per channel, or 2.67 ohms. Input sensitivity is 0.08 V and gain is 30 dB. Frequency response at 1 W is 20 Hz - 20 kHz, THD+N is 0.05% and S/N ratio is 98 dB. Crosstalk is 80 dB at 1 kHz and 70 dB at 10 kHz, and noise is 0.3 mV. Dimensions are 292 x 432 x 38 mm (L x W x H). Mains input is 100 - 120 V or 220 - 240 V, 50/60 Hz, with a maximum draw of 400 W.

Engineering and use context

Each channel has a three-position analog filter switch instead of DSP - 20 Hz high-pass for subwoofers and large full-range speakers, flat, or 100 Hz high-pass for small speakers used with a subwoofer. Bridge switches join channels 1 and 2 or 3 and 4. In bridged mode the speaker connects across the two red terminals, and the signal goes to the odd-numbered input. Inside, oversized heat sinks cool the circuitry without a fan.

Three turn-on modes are available. In Normal mode the front master switch operates the amplifier. Audio Sense, the factory default, switches it on at a 5 mV input signal and off 30 minutes after the signal stops. The third mode uses a 3 - 24 V AC or DC opto-isolated trigger on a 3.5 mm mono jack, at 20 mA or more. A second 3.5 mm jack supplies a 12 V DC control output of up to 150 mA while the amplifier is on. When a fault occurs, the protection circuitry shuts the amplifier off, and it resumes normal operation once conditions return to normal.

On the brushed aluminium front panel, each channel LED shows green for signal and red for clipping. A bicolor status LED is blue in operation and red when the protection circuitry is active. Per-channel input level controls on the rear are set at 12 o'clock from the factory. Included with it are rack ears, tabletop feet and a detachable power cord.

Pairing

The rear panel has gold-plated RCA inputs, cascade RCA outputs on every channel and five-way binding posts. Its cascade outputs allow patching to an adjacent channel or to another amplifier.

Alternatives

Proficient Audio makes no other power amplifier in its current range.

Specifications

  • Model name

    PAS-A4100

  • Input sensitivity (mV)

    80

  • Input impedance (balanced) (Ω)

    N/A

  • Input impedance (single-ended) (Ω)

    N/A

  • Output impedance (balanced) (Ω)

    N/A

  • Output impedance (single-ended) (Ω)

    N/A

  • Max current (A)

    N/A

  • Output power (8Ω) (W)

    70 RMS (100 Peak)

  • Output power (4Ω) (W)

    N/A

  • Gain (dBu)

    30

  • Frequency response low +/- 3dB (Hz)

    20

  • Frequency response high +/- 3dB (Hz)

    20 000

  • Signal to Noise Ratio (dB)

    98

  • Total Harmonic Distortion + Noise (0% global feedback) (%)

    N/A

  • Total Harmonic Distortion + Noise (100% global feedback) (%)

    0.05

  • Max power consumption (W)

    N/A

  • Damping factor

    N/A

  • Dimensions (mm)

    292 x 432 x 38

  • Weight (kg)

    N/A

  • Official link