Hifiverse

Power amplifiers stereo - Electric Audio PAE 150

Description, images, technical data and specifications

Electric Audio PAE 150
Image source - (c) Electric Audio

The PAE 150 is a transistor stereo power amplifier from Electric Audio, a brand of Gauder Akustik and AMP distributed by GKS Vertriebs GmbH of Renningen. Inside is the same power amplifier as in the TAE 150 integrated, and both models were new for High End Munich 2025. Electric Audio develops and builds them entirely in Germany. Prices start at EUR 6,998, and the Double Vision (DV) version with higher-grade parts costs extra.

Key specs that matter

Each channel has eight MOS-FETs with more than 80 A of output current, or 90 A in the DV, and the amplifier is 2-ohm stable. Sine power on Electric Audio's website is 132 W into 8 ohms, 218 W into 4 ohms and 366 W into 2 ohms. Power is also given as 120, 200 and 300 W for the standard version and 130, 215 and 320 W for the DV, with impulse power of 140, 260 and 485 W and 155, 280 and 520 W. THD is 0.006% (25 W/4 ohms), S/N is 91 dB or 94 dB(A), and rise time is 2.1 µs (10 V/4 ohms). Bandwidth is 3 Hz - 170 kHz. One stereo input is offered as RCA or XLR, not both at once. Standby consumption is 0.3 W. Dimensions are 435 x 195 x 390 mm (W x H x D), and weight is 22 kg, or 23.5 kg for the DV.

Engineering and use context

Electric Audio describes the PAE 150 as a purely analogue power amplifier with no digital processors. The standard version has a 750 VA mains transformer and 80,000 µF of filter capacitance. With the DV these rise to 1,000 VA and 160,000 µF, and WBT-0707 output jacks replace WBT-0708, with a higher-quality mains cable. A DV cannot be retrofitted.

Four WBT output jacks connect one pair of speakers. The rear also carries an RJ45 link socket, a 5 V trigger output, a USB port for service and updates and the power switch. On the front are the logo, the IR sensor, a level bar, the on/off button and a standby bar, and the lit elements offer 13 colours with adjustable brightness.

Linked to a TAE 150 by the supplied RJ45 patch cable, the PAE 150 adopts its display settings. Its level is then set relative to the TAE 150 at -3, -1.5, 0, +1.5 or +3 dB. Protective circuits cover overheating, short circuit and overload, and faults are shown by flashing patterns of the logo. The RCE 1 remote is included and is needed for the light settings when no TAE 150 is connected, and the RCE 11 is optional. An IEC power cable, gloves and a microfibre cloth are also in the box. Online registration gives a three-year warranty.

Pairing

A preamplifier with adjustable output level, or the TAE 150, is required. For bi-amping with the TAE 150, the bridges between the bass and mid-high speaker terminals must be removed.

Alternatives

Electric Audio makes no other power amplifier, as its only other model is the TAE 150 integrated amplifier.

Specifications

  • Model name

    PAE 150

  • Input sensitivity (mV)

    N/A

  • Input impedance (balanced) (Ω)

    N/A

  • Input impedance (single-ended) (Ω)

    N/A

  • Output impedance (balanced) (Ω)

    N/A

  • Output impedance (single-ended) (Ω)

    N/A

  • Max current (A)

    N/A

  • Output power (8Ω) (W)

    132

  • Output power (4Ω) (W)

    218

  • Gain (dBu)

    N/A

  • Frequency response low +/- 3dB (Hz)

    N/A

  • Frequency response high +/- 3dB (Hz)

    N/A

  • Signal to Noise Ratio (dB)

    N/A

  • Total Harmonic Distortion + Noise (0% global feedback) (%)

    N/A

  • Total Harmonic Distortion + Noise (100% global feedback) (%)

    N/A

  • Max power consumption (W)

    N/A

  • Damping factor

    N/A

  • Dimensions (mm)

    435 х 195 х 390

  • Weight (kg)

    22

  • Official link

Related content