Hifiverse

Power amplifiers stereo — Gold Note PA-10 EVO

Description, images, technical data and specifications

Gold Note PA-10 EVO
Image source - (c) Gold Note

The PA-10 EVO is a compact, fully balanced power amplifier in the 10 Series of Gold Note. It operates in stereo or mono mode, and two units can be used as monoblocks. Its chassis is solid aluminium, 200 mm wide, and each unit is assembled and tested by hand. Prices are GBP 1,699, USD 1,999 or EUR 1,750.

Key specs that matter

Power output is 2 x 140 W into 8 or 4 ohms in stereo and 1 x 280 W into 8 or 4 ohms in mono, both at 1% THD. Frequency response is 5 Hz - 50 kHz (-3 dB), and THD is 0.01% (1 kHz, 1 W). Damping factor is switchable, High = 250 or Low = 25. Inputs are one RCA unbalanced and one XLR balanced, with an input sensitivity of 2.5 Vrms on both. Input impedance is 3.6 kohms on RCA and 7.2 kohms on XLR. Speaker outputs are binding posts. Power consumption is below 1 W in standby and below 6 W with no signal. Dimensions are 200 x 80 x 260 mm (W x H x D), and weight is 3 kg net or 4 kg boxed.

Engineering and use context

Gold Note gives the adjustable damping factor as the means of matching the amplifier to loudspeakers from 3-way floorstanding designs to mini-monitors. With GN Link, the source switches the amplifier on and off in master-slave mode. The power supply accepts 100-240 V (50/60 Hz), and the fuse is rated 5 A T. Operating limits are 0 to 35 °C and 90% humidity without condensation.

A PA-10 EVO cannot be combined with the earlier PA-10, but it works with all Gold Note electronics, preamplifiers and tube output stages. Finishes are black, silver and gold anodised aluminium, each with a brushed surface.

Pairing

Gold Note names the DS-10 EVO as the source and the A3 EVO II or A6 EVO II as the loudspeakers for a compact 10 Series system. A source or preamplifier with a variable output is required. Mono operation requires a second PA-10 EVO.

Alternatives

The PA-1175 MkII is the larger Gold Note stereo power amplifier, a Class AB design rated at 200 W per channel into 8 ohms and bridgeable to 520 W.

Specifications

  • Model name

    PA-10 EVO

  • Input sensitivity (mV)

    2500

  • Input impedance (balanced) (Ω)

    7200

  • Input impedance (single-ended) (Ω)

    3600

  • Output impedance (balanced) (Ω)

    N/A

  • Output impedance (single-ended) (Ω)

    N/A

  • Max current (A)

    N/A

  • Output power (8Ω) (W)

    140

  • Output power (4Ω) (W)

    140

  • Gain (dBu)

    N/A

  • Frequency response low +/- 3dB (Hz)

    5

  • Frequency response high +/- 3dB (Hz)

    50 000

  • Signal to Noise Ratio (dB)

    N/A

  • Total Harmonic Distortion + Noise (0% global feedback) (%)

    N/A

  • Total Harmonic Distortion + Noise (100% global feedback) (%)

    0,01

  • Max power consumption (W)

    N/A

  • Damping factor

    N/A

  • Dimensions (mm)

    200 x 80 x 260

  • Weight (kg)

    3

  • Official link

More components