Hifiverse

Power amplifiers stereo — Lab12 Mighty

Description, images, technical data and specifications

Lab12 Mighty
Image source - (c) Lab12

The Mighty is a stereo tube power amplifier from Lab12 of Greece. It is a Class A, single-ended design with no feedback, finished in Matt Black and supplied with EL34 output tubes. Lab12 designed it to work with its own hpa and True units.

Key specs that matter

Output power is 10 W per channel. Frequency response is 20 Hz - 25 kHz (-0.9 dB). The tube complement is two 6N1P dual triodes and two EL34 output tubes. There is one stereo line input on RCA connectors, with an input impedance of 100 kohms. Input sensitivity is 600 mV in triode mode and 400 mV in Ultra-Linear mode. Recommended speaker impedance is 4 - 8 ohms. Mains supply is 230 VAC 50 Hz (115 VAC 60 Hz), and power consumption is 150 VA maximum. Dimensions are 32 x 17 x 29 cm (W x H x D), and weight is 9 kg.

Engineering and use context

Each channel has its own single-ended output stage with one EL34. A selector switch sets the output tubes to triode or Ultra-Linear connection, and 6550 and KT88 tubes are compatible. Lab12 includes its SRSG and Fine symmetry implementations in the circuit, both registered names of the company. On the front sit analogue VU meters made by Nissei.

Its 5 mm aluminium face panel has the glass-blasted anodised finish that Lab12 applies to all its products. Lab12 gives a five-year guarantee and states that the circuit uses a selection of audiophile-grade electronic components.

Pairing

A preamplifier or a source with a variable-level RCA output is required, and all source switching takes place in that preamplifier. High-sensitivity loudspeakers with a nominal impedance within the recommended 4 - 8 ohm range are required. The matching Lab12 preamplifiers are the hpa and the True, and other preamplifiers with an RCA output can also be used.

Alternatives

Lab12 has no other stereo power amplifier in its range.

Specifications

  • Model name

    Mighty

  • Input sensitivity (mV)

    N/A

  • Input impedance (balanced) (Ω)

    N/A

  • Input impedance (single-ended) (Ω)

    N/A

  • Output impedance (balanced) (Ω)

    N/A

  • Output impedance (single-ended) (Ω)

    N/A

  • Max current (A)

    N/A

  • Output power (8Ω) (W)

    2 x 10

  • Output power (4Ω) (W)

    N/A

  • Gain (dBu)

    N/A

  • Frequency response low +/- 3dB (Hz)

    20

  • Frequency response high +/- 3dB (Hz)

    25000

  • Signal to Noise Ratio (dB)

    N/A

  • Total Harmonic Distortion + Noise (0% global feedback) (%)

    N/A

  • Total Harmonic Distortion + Noise (100% global feedback) (%)

    N/A

  • Max power consumption (W)

    N/A

  • Damping factor

    N/A

  • Dimensions (mm)

    320 x 170 x 290

  • Weight (kg)

    9

  • Official link

Related content