Hifiverse

Power amplifiers stereo - McIntosh MC8207

Description, images, technical data and specifications

McIntosh MC8207
Image source - (c) McIntosh

The McIntosh MC8207 is a seven-channel transistor amplifier designed for home theater systems that need multichannel amplification. McIntosh built it between 2011 and 2025, and it now appears in the company catalogue as a legacy product. According to the maker, its output is enough to power every speaker in a 7.1 home theater, demanding ones included.

Key specs that matter

Rated output is 200 W per channel with all seven channels working into 8 ohms. Distortion is rated at 0.005% maximum, and noise sits 112 dB down. Frequency response is quoted as 20 Hz to 20 kHz within +0 and -0.5 dB. Input sensitivity is 2.8 V. The case measures 44.45 cm wide, 24 cm tall and 53.3 cm deep, and the unit weighs 47.6 kg, with a shipping weight of 51.7 kg.

Engineering and use context

The McIntosh Dynamic Power Manager technology lets the MC8207 deliver its full rated power into 4 ohm loads as well as 8 ohm ones. Power Guard prevents speaker damage from clipping and over-driving of the amplifier, while Sentry Monitor gives short-circuit protection by disengaging the output stage before current goes past safe operating levels. The amplifier does without cooling fans, relying on a thermal management system to carry heat away during long sessions, which also removes fan noise from the room during film playback. Channel status is shown by LED output indicators, and the front carries a classic black glass fascia with a lit logo and blue power meters. It belongs to the generation of McIntosh multichannel amplifiers that preceded the current MC255 and MC257 models, which use the same Dynamic Power Manager and protection circuits.

Pairing

Balanced inputs are fitted on all seven channels, so a processor with XLR outputs can be connected throughout. The amplifier can also run as a two-zone unit, with five channels assigned to zone A for a surround system and the remaining two channels to zone B for stereo in another room.

Alternatives

The McIntosh MC257 is the current seven-channel solid-state model.

Specifications

  • Model name

    MC8207

  • Input sensitivity (mV)

    2800 (XLR) + 2000 (RCA)

  • Input impedance (balanced) (Ω)

    N/A

  • Input impedance (single-ended) (Ω)

    N/A

  • Output impedance (balanced) (Ω)

    N/A

  • Output impedance (single-ended) (Ω)

    N/A

  • Max current (A)

    N/A

  • Output power (8Ω) (W)

    200

  • Output power (4Ω) (W)

    200

  • Gain (dBu)

    N/A

  • Frequency response low +/- 3dB (Hz)

    10

  • Frequency response high +/- 3dB (Hz)

    100 000

  • Signal to Noise Ratio (dB)

    112

  • Total Harmonic Distortion + Noise (0% global feedback) (%)

    N/A

  • Total Harmonic Distortion + Noise (100% global feedback) (%)

    0.005

  • Max power consumption (W)

    N/A

  • Damping factor

    >140

  • Dimensions (mm)

    445 x 239 x 533

  • Weight (kg)

    52.6

  • Official link

More components