Hifiverse

Power amplifiers stereo - McIntosh MC2152 70TH ANNIVERSARY

Description, images, technical data and specifications

McIntosh MC2152 70TH ANNIVERSARY
Image source - (c) McIntosh

The MC2152 70th Anniversary is a stereo vacuum tube power amplifier that McIntosh produced from 2019 to 2022 to mark seven decades since the company was founded in 1949. It is rated at 150 W per channel. Its chassis is bead-blasted black anodised aluminium with matte-finish carbon fibre side panels. Launch price was about USD 15,000.

Key specs that matter

Power output is 150 W per channel into 2, 4 or 8 ohms. Total harmonic distortion is 0.5% maximum from 20 Hz to 20 kHz. Frequency response is 20 Hz - 20 kHz (+0/-0.25 dB) and 10 Hz - 70 kHz (+0/-3 dB). Signal-to-noise ratio is 112 dB, damping factor is greater than 18 and dynamic headroom is 1.2 dB. Its tube complement is eight KT88, four 12AX7A and four 12AT7. Inputs are 2 balanced and 2 unbalanced. Dimensions are 44.45 x 26 x 71.1 cm (W x H x D), net weight is 56.7 kg and shipping weight is 62.6 kg.

Engineering and use context

McIntosh uses its Unity Coupled Circuit output transformers and states that with them the full 150 W can be delivered to almost any pair of speakers. Outputs for 2, 4 and 8 ohm loads are provided on Solid Cinch speaker binding posts, and Power Control is included.

Sentry Monitor monitors the output current and can shut the amplifier off.

All sixteen tubes are covered by a 12-gauge stainless steel wire cage with a black powder-coated finish. Tube lighting has three settings - off, which leaves the natural amber glow of the tubes visible, green or blue. The top plate of the transformer enclosures is laser engraved.

Pairing

A separate preamplifier is required, connected by either balanced or unbalanced cables. Because the rated power is available into three load impedances, the loudspeakers are connected to the binding posts that correspond to their nominal impedance. With its low damping factor the MC2152 is better suited to loudspeakers whose impedance does not vary strongly with frequency. McIntosh preamplifiers can switch it on and off through Power Control.

Alternatives

The MC275 is McIntosh's long-running KT88 stereo tube amplifier, rated at 75 W per channel.

Specifications

  • Model name

    MC2152 70TH ANNIVERSARY

  • Input sensitivity (mV)

    N/A

  • Input impedance (balanced) (Ω)

    N/A

  • Input impedance (single-ended) (Ω)

    N/A

  • Output impedance (balanced) (Ω)

    N/A

  • Output impedance (single-ended) (Ω)

    N/A

  • Max current (A)

    N/A

  • Output power (8Ω) (W)

    150

  • Output power (4Ω) (W)

    150

  • Gain (dBu)

    N/A

  • Frequency response low +/- 3dB (Hz)

    20

  • Frequency response high +/- 3dB (Hz)

    20 000

  • Signal to Noise Ratio (dB)

    112

  • Total Harmonic Distortion + Noise (0% global feedback) (%)

    N/A

  • Total Harmonic Distortion + Noise (100% global feedback) (%)

    0.5

  • Max power consumption (W)

    N/A

  • Damping factor

    N/A

  • Dimensions (mm)

    4445 x 260 x 711

  • Weight (kg)

    56.7

  • Official link

More components