Hifiverse

Power amplifiers stereo - Musical Fidelity M6S PRX

Description, images, technical data and specifications

Musical Fidelity M6S PRX
Image source - (c) Musical Fidelity

The M6s PRX is a stereo power amplifier in the M6s series from Musical Fidelity, released in 2015. It has a fully balanced dual mono construction, circuitry based on the company's Titan power amplifier and choke-regulated power supplies. In 2018 its recommended retail price was EUR 2,990, and finishes are black or silver.

Key specs that matter

Rated power output is 230 W per channel into 8 ohms, with an output voltage of 43 V (without clipping) and a peak-to-peak current of 140 A. Damping factor is 210. THD is below 0.007% typical, 20 Hz - 20 kHz (line in), and signal-to-noise ratio exceeds 120 dB (A-weighted). Frequency response is +0, -0.1 dB from 10 Hz to 100 kHz. Inputs are two pairs of RCA and one pair of XLR, switchable, and a pair of RCA loop-out sockets is provided. There are four pairs of speaker output connectors for banana plugs. Dimensions are 440 x 125 x 390 mm (W x H x D) and net weight is 19.7 kg. Power consumption is 750 W maximum and 0.5 W in standby, on 115-230 V AC, 50/60 Hz.

Engineering and use context

Musical Fidelity uses its own dual mono, fully complementary, bifilar choke regulation system. Choke regulation is a concept from tube amplifier days, and according to the company it has not been used with transistor amplifiers by anyone else. Its stated benefits are lower saw-tooth power supply noise and effective filtering of mains noise. Musical Fidelity has used this technology since 1987, and the dual mono, bifilar version is unique to the brand.

Each channel has eight output transistors. According to Musical Fidelity, the circuit has very low wide-band distortion, low output impedance, high load-driving capability, wide stability margins and very high peak current delivery. Its circuit layout is optimised for low noise. An IEC power cord (10 A) is supplied.

Pairing

The matching preamplifier is the M6s PRE. Its XLR input accepts any preamplifier with balanced outputs. The RCA loop output allows bi-amping with a second M6s PRX, and the four pairs of terminals allow bi-wiring.

Alternatives

The Musical Fidelity M8S-500S belongs to the larger M8s series of stereo power amplifiers, for systems that need more output.

Specifications

  • Model name

    M6S PRX

  • Input sensitivity (mV)

    N/A

  • Input impedance (balanced) (Ω)

    N/A

  • Input impedance (single-ended) (Ω)

    N/A

  • Output impedance (balanced) (Ω)

    N/A

  • Output impedance (single-ended) (Ω)

    N/A

  • Max current (A)

    N/A

  • Output power (8Ω) (W)

    230

  • Output power (4Ω) (W)

    N/A

  • Gain (dBu)

    N/A

  • Frequency response low +/- 3dB (Hz)

    10

  • Frequency response high +/- 3dB (Hz)

    100 000

  • Signal to Noise Ratio (dB)

    >120

  • Total Harmonic Distortion + Noise (0% global feedback) (%)

    N/A

  • Total Harmonic Distortion + Noise (100% global feedback) (%)

    <0.007

  • Max power consumption (W)

    N/A

  • Damping factor

    N/A

  • Dimensions (mm)

    440 x 125 x 395

  • Weight (kg)

    19.7

  • Official link

More components