Hifiverse

Power amplifiers stereo - Circle Labs Audio M500

Description, images, technical data and specifications

Circle Labs Audio M500
Image source - (c) Circle Labs Audio

The M500 is a hybrid stereo power amplifier from Circle Labs of Cracow, Poland, with a tube input stage and bipolar transistor output stages. It can also work as a monoblock with a fully balanced circuit. In the Circle Labs range it sits above the M200, and a three-step sensitivity adjustment widens the choice of preamplifiers. Shipping weight is 36 kg.

Key specs that matter

Output power in stereo mode is 180 W into 8 ohms and 340 W into 4 ohms. In monoblock mode it is 600 W into 8 ohms and 1200 W into 4 ohms. Frequency response is 2 Hz - 800 kHz (-3 dB). Sensitivity is 0.85 V for full power, and gain is 35 dB, with the gain selector giving 32 dB (-3 dB) and 27 dB (-8 dB). Input impedance is 47 kohms. Dimensions are 430 x 360 x 230 mm and net weight is 31 kg. Power consumption is below 0.1 W in standby, 100 W when on and 1400 W maximum. Its main fuse is a T10 A 5 x 20 mm type in the 230 V version and T20 A in the 120 V version.

Engineering and use context

At the input sits a selected ECC88/6922 triode in an SRPP configuration. This single-tube stage has one resistor and a Mundorf Silver Gold Oil signal capacitor, for a short signal path. Ultra-low-noise Burr-Brown J-FET transistors are used in the input stages.

Circle Labs calls its output stage design Circle Power and says it brings the M500 closer to single-ended amplifier topology. Its power stages are based on high-current Sanken bipolar transistors.

Each channel has a separate power supply circuit in a dual-mono layout, with a DC-blocker circuit and toroidal transformers with a total power rating of 1200 W. Capacitors in the power supply total 880,000 µF. A shielded EI-core transformer powers the tube preamplifier section. Inside, the fuses are 2 x T5 A and 1 x T400 mA in the 230 V version, and 2 x T10 A and 1 x T800 mA in the 120 V version.

Pairing

A preamplifier is required. The matching preamplifier in the Circle Labs range is the P300. Its gain selector allows preamplifiers with different output levels. For monoblock operation one M500 is required per channel.

Alternatives

The M200 is the smaller Circle Labs stereo power amplifier, with 160 W into 8 ohms in stereo mode and a net weight of 20 kg.

Specifications

  • Model name

    M500

  • Input sensitivity (mV)

    N/A

  • Input impedance (balanced) (Ω)

    N/A

  • Input impedance (single-ended) (Ω)

    N/A

  • Output impedance (balanced) (Ω)

    N/A

  • Output impedance (single-ended) (Ω)

    N/A

  • Max current (A)

    N/A

  • Output power (8Ω) (W)

    140 (Stereo), 600 (Mono)

  • Output power (4Ω) (W)

    340 (Stereo), 1200 (Mono)

  • Gain (dBu)

    N/A

  • Frequency response low +/- 3dB (Hz)

    N/A

  • Frequency response high +/- 3dB (Hz)

    N/A

  • Signal to Noise Ratio (dB)

    N/A

  • Total Harmonic Distortion + Noise (0% global feedback) (%)

    N/A

  • Total Harmonic Distortion + Noise (100% global feedback) (%)

    N/A

  • Max power consumption (W)

    N/A

  • Damping factor

    N/A

  • Dimensions (mm)

    N/A

  • Weight (kg)

    N/A

  • Official link

More components