Hifiverse

Power amplifiers stereo — Denon HEOS Amp HS2

Description, images, technical data and specifications

Denon HEOS Amp HS2
Image source - (c) Denon

The HEOS Amp HS2 is a compact two-channel Denon amplifier with the HEOS network platform built in, designed to add wireless streaming to a pair of passive loudspeakers and make them one zone of the HEOS multi-room system. This HS2 generation added Bluetooth and high-resolution file support to the original HEOS Amp, and its US list price was USD 499. Denon now lists it as an archived model.

Key specs that matter

Rated output is 100 W + 100 W into 6 ohms (1 kHz, THD 0.7%, both channels driven) and 70 W + 70 W into 8 ohms (20 Hz - 20 kHz, THD 0.05%). Speaker output connectors accept 4 - 16 ohms. For the analogue input, THD+N is 0.5% (1 kHz), S/N ratio is 86 dB (10 W, 6 ohms, IHF-A weighted) and frequency response is 10 Hz - 40 kHz (+1, -3 dB). Input sensitivity is 150 mV / 47 kohm. Power consumption is 60 W in operation, 3.5 - 4.2 W in Quick Start Mode depending on the connection and 0.3 W in Deep Standby Mode. Dimensions are approximately 94 x 222 x 214 mm (H x W x D), and weight is 2.8 kg.

Engineering and use context

On the back panel are LINE IN stereo RCA connectors, a 3.5 mm AUX IN jack, an OPTICAL IN digital input, a USB input (5 V/1 A) for storage devices, a NETWORK connector, the speaker terminals and a SUBWOOFER output for a powered subwoofer. Bluetooth and CONNECT buttons for pairing and Wi-Fi setup sit on the rear as well, while volume and mute controls are on the side panel. Wireless networking conforms to IEEE 802.11a/b/g/n/ac at 2.4 GHz and 5 GHz, and a single RJ-45 jack allows wired Ethernet.

HEOS playback covers FLAC, ALAC and WAV files at up to 192 kHz/24-bit, DSD at 2.8 MHz and 5.6 MHz, AAC and MP3 up to 320 kbps and WMA up to 192 kbps, from USB, DLNA-compliant NAS or phone storage. Listed music services are Pandora, Spotify, TuneIn, Napster, SiriusXM, Amazon Music, Tidal, iHeartRadio, Deezer and SoundCloud, subject to region. Denon quotes microsecond audio synchronisation between HEOS devices, and every room can play the same song or each room a different one. Control is through the HEOS app on iOS or Android. Operating temperature range is 5 - 35 °C. In the box are a power cord, a 3.5 mm setup cable, an Ethernet cable and a Quick Start Guide. The finish is gunmetal silver on the front, top and back, with black sides.

Pairing

Passive loudspeakers within the rated impedance range are required. A powered subwoofer connects to the SUBWOOFER output.

Alternatives

The Denon Home Amp is a newer two-channel amplifier powered by HEOS, rated at 100 W per channel into 8 ohms and equipped with HDMI eARC.

Specifications

  • Model name

    HEOS Amp HS2

  • Input sensitivity (mV)

    150

  • Input impedance (balanced) (Ω)

    N/A

  • Input impedance (single-ended) (Ω)

    47 000

  • Output impedance (balanced) (Ω)

    N/A

  • Output impedance (single-ended) (Ω)

    N/A

  • Max current (A)

    N/A

  • Output power (8Ω) (W)

    70

  • Output power (4Ω) (W)

    N/A

  • Gain (dBu)

    N/A

  • Frequency response low +/- 3dB (Hz)

    10

  • Frequency response high +/- 3dB (Hz)

    40 000

  • Signal to Noise Ratio (dB)

    86

  • Total Harmonic Distortion + Noise (0% global feedback) (%)

    N/A

  • Total Harmonic Distortion + Noise (100% global feedback) (%)

    0.5

  • Max power consumption (W)

    N/A

  • Damping factor

    N/A

  • Dimensions (mm)

    93 x 221 x 214

  • Weight (kg)

    2.8

  • Official link