Hifiverse

Power amplifiers stereo - Mytek Brooklyn AMP+

Description, images, technical data and specifications

Mytek Brooklyn AMP+
Image source - (c) Mytek

The Brooklyn AMP+ is a dual mono class D power amplifier from Mytek, designed in New York and housed in a half-rack enclosure. It is the updated version of the original Brooklyn AMP. Mytek designed it either as a stand-alone stereo power amplifier or as the partner for the Brooklyn Bridge in a streaming and vinyl system.

Key specs that matter

At 1% THD the Brooklyn AMP+ is rated at 2 x 250 W into 8 ohms and 2 x 300 W into 4 ohms, with a peak rating of 2 x 1200 W. Bridged to mono it gives 500 W into 8 ohms and 600 W into 4 ohms. Output swing is 57 Vp, or 114 Vpp, unloaded. Frequency response is 10 Hz - 30 kHz (-3 dB). SNR exceeds 121 dB, THD in regular use is below 0.001%, and damping factor is above 400. Dimensions are 216 x 225 x 44 mm (W x D x H), and weight is 3 kg.

Engineering and use context

Mytek calls this its newest generation of class D. The amplifier uses a fast 650 kHz clock, which according to Mytek extends bandwidth, and the output stage uses fast FET transistors. Its layout is dual mono, and two units can be run in bridge mode as a pair of monoblocks.

Protection circuitry covers short circuit, DC, under voltage, temperature and overload. For remote power-on there is a 12 V DC trigger input on a minijack. The power supply accepts 100 - 240 V AC at 50/60 Hz. Warranty is two years.

Pairing

The matching source is the Mytek Brooklyn Bridge streaming DAC and preamplifier. Bridged mono operation requires a second Brooklyn AMP+.

Alternatives

The Brooklyn AMP is the original version of this Mytek stereo power amplifier, in the same half-rack format.

Specifications

  • Model name

    Brooklyn AMP+

  • Input sensitivity (mV)

    N/A

  • Input impedance (balanced) (Ω)

    N/A

  • Input impedance (single-ended) (Ω)

    N/A

  • Output impedance (balanced) (Ω)

    N/A

  • Output impedance (single-ended) (Ω)

    N/A

  • Max current (A)

    N/A

  • Output power (8Ω) (W)

    2 x 300

  • Output power (4Ω) (W)

    2 x 250

  • Gain (dBu)

    N/A

  • Frequency response low +/- 3dB (Hz)

    10

  • Frequency response high +/- 3dB (Hz)

    30 000

  • Signal to Noise Ratio (dB)

    >121

  • Total Harmonic Distortion + Noise (0% global feedback) (%)

    N/A

  • Total Harmonic Distortion + Noise (100% global feedback) (%)

    <0.001

  • Max power consumption (W)

    N/A

  • Damping factor

    >400

  • Dimensions (mm)

    216 x 225 x 44

  • Weight (kg)

    3

  • Official link