Hifiverse

Power amplifiers stereo - Emotiva BasX A11

Description, images, technical data and specifications

Emotiva BasX A11
Image source - (c) Emotiva

The BasX A11 is an eleven-channel power amplifier from Emotiva, the American company, and belongs to its more affordable BasX line. One chassis amplifies all channels of a multichannel home cinema system, for example with Emotiva's MC1 surround processor.

Key specs that matter

Rated output with all eleven channels driven is 105 W per channel into 8 ohms (20 Hz - 20 kHz, THD < 0.1%) and 140 W per channel into 4 ohms (1 kHz, THD < 1%). With seven channels driven the figures are 125 W into 8 ohms and 180 W into 4 ohms, with five channels 145 W and 200 W, and with two channels 160 W and 260 W. Power bandwidth is 20 Hz - 20 kHz (±0.07 dB) at rated power into 4 to 8 ohms, and frequency response is 10 Hz - 80 kHz (+0/-1.8 dB). THD+N is below 0.02% and signal-to-noise ratio is above 115 dB, both A-weighted and referenced to rated power. Gain is 29 dB, input sensitivity is 1.2 V for rated power into 8 ohms, and input impedance is 27 kohms. Damping factor is above 500 into 8 ohms. Minimum recommended load is 4 ohms per channel (one 4 ohm speaker or two 8 ohm speakers in parallel). The amplifier measures 432 x 197 x 394 mm (W x H x D, without connectors) and weighs 23.1 kg.

Engineering and use context

Emotiva specifies a heavy-duty Class H power supply with an oversized toroidal power transformer, chosen for efficiency and cool operation. Each of the eleven channels has a high-current Class A/B output stage with a short signal path. Protection circuitry guards against excessive operating temperature, shorted speaker connections and ground faults.

Signal inputs are unbalanced RCA connectors. A trigger input accepts 5 - 12 V AC or DC at under 10 mA, and the trigger output supplies 12 V DC at up to 120 mA. Mains voltage of 115 V or 230 V (50/60 Hz) is detected automatically. Its heavy steel chassis carries a milled aluminium faceplate, and the warranty period is three years.

Pairing

A surround processor or AV receiver with unbalanced pre-outs is required. The trigger input and output allow the A11 to switch on and off with the processor. Its five-way terminals accept banana plugs, spade lugs or bare wire.

Alternatives

The BasX A-700 is Emotiva's seven-channel power amplifier in the same line.

Specifications

  • Model name

    BasX A11

  • Input sensitivity (mV)

    1200

  • Input impedance (balanced) (Ω)

    N/A

  • Input impedance (single-ended) (Ω)

    27 000

  • Output impedance (balanced) (Ω)

    N/A

  • Output impedance (single-ended) (Ω)

    N/A

  • Max current (A)

    N/A

  • Output power (8Ω) (W)

    105

  • Output power (4Ω) (W)

    140

  • Gain (dBu)

    29

  • Frequency response low +/- 3dB (Hz)

    10

  • Frequency response high +/- 3dB (Hz)

    80 000

  • Signal to Noise Ratio (dB)

    >115

  • Total Harmonic Distortion + Noise (0% global feedback) (%)

    N/A

  • Total Harmonic Distortion + Noise (100% global feedback) (%)

    < 0.02

  • Max power consumption (W)

    N/A

  • Damping factor

    >500

  • Dimensions (mm)

    432 × 197 × 394

  • Weight (kg)

    23,1

  • Official link

More components