Hifiverse

Power amplifiers stereo - QUAD 303 Power Amplifier

Description, images, technical data and specifications

QUAD 303 Power Amplifier
Image source - (c) QUAD

The QUAD 303 is a stereo power amplifier from the British manufacturer QUAD and the partner to the new QUAD 33 preamplifier. It reissues the original 303 concept, re-engineered rather than simply given new components. The original 33 and 303 design is in the collection of the Museum of Modern Art in New York. Its development team included QUAD service engineers Rob Flain and Paul McConville, designer Jan Ertner, acoustic director Peter Comeau and industrial designer David McNeill.

Key specs that matter

It is a class AB design with a custom 200VA toroidal transformer. Rated power is 2 x 50 W (8 ohms, THD <1%) and 2 x 70 W (4 ohms, THD <1%) in stereo, or 140 W (8 ohms) and 170 W (4 ohms) bridged. Maximum output current is 10 A. Frequency response is 20 Hz - 20 kHz (±0.3 dB), THD is below 0.002% (1 kHz), and signal-to-noise ratio is above 108 dB (A-weighted). Gain is +29 dB. Input sensitivity is 700 mV RMS on the line input and 1.5 V RMS on XLR, with input impedance of 15 kohms and 22 kohms. Standby consumption is below 0.5 W. Dimensions are 120 x 176 x 325 mm (W x H x D), and weight is 8.4 kg.

Engineering and use context

Its output stage uses the QUAD symmetrical triples. QUAD states that they provide a completely symmetrical output stage, reduce distortion and make the resting current independent of output transistor temperature. Because the triples control the output current and the voltage is also controlled, the output transistors are protected and always operate within their ratings.

Earlier power transistors offered no complementary NPN and PNP pairs, so the old 303 used a quasi-complementary output stage. Its successor has a fully complementary output stage with more stable static bias. In original form the 303 was rated at 45 W into 8 ohms and was known to have issues with lower impedance loads, and according to QUAD the new model drives its electrostatic loudspeakers.

Each side carries CNC-routed heat sinks, and the anodised tank housing resists external vibrations. Stereo or bridge operation is selectable. Connections are one RCA line input, one balanced XLR input, a 12 V trigger input with a trigger link output and one pair of stereo speaker binding posts. A remote control is supplied, and the finish is Classic QUAD Grey.

Pairing

The matching preamplifier is the QUAD 33. A source with balanced output can use the XLR input. Two 303 units in bridge mode work as mono power amplifiers. Loudspeakers of 4 ohms nominal are within its rating.

Alternatives

The Artera Mono is a mono power amplifier from QUAD's Artera series.

Specifications

  • Model name

    303 Power Amplifier

  • Input sensitivity (mV)

    N/A

  • Input impedance (balanced) (Ω)

    10000

  • Input impedance (single-ended) (Ω)

    N/A

  • Output impedance (balanced) (Ω)

    N/A

  • Output impedance (single-ended) (Ω)

    N/A

  • Max current (A)

    N/A

  • Output power (8Ω) (W)

    2 x 50

  • Output power (4Ω) (W)

    2 x 70

  • Gain (dBu)

    N/A

  • Frequency response low +/- 3dB (Hz)

    20

  • Frequency response high +/- 3dB (Hz)

    20000

  • Signal to Noise Ratio (dB)

    108

  • Total Harmonic Distortion + Noise (0% global feedback) (%)

    N/A

  • Total Harmonic Distortion + Noise (100% global feedback) (%)

    0.002

  • Max power consumption (W)

    N/A

  • Damping factor

    N/A

  • Dimensions (mm)

    120 x 176 x 325

  • Weight (kg)

    8.4

  • Official link

Related content