The Virtus M1 is a pure Class A tube mono power amplifier designed and produced by Canor in Prešov, Slovakia, and it belongs to the company's Reference Line. Canor calls it the reference power amplifier of the brand. It is sold as a single monoblock, so a stereo system needs two units. The recommended retail price in 2022 was EUR 13,000 per unit, and the current list price is EUR 14,200.
Key specs that matter
Each chassis carries four KT150 output tubes, two ECC82 and one ECC81. Output is 110 W into 8 ohms in ultralinear mode and 55 W into 4.8 ohms in triode mode, both at THD below 3%. Gain is 24 dB into 4 ohms, and the single XLR input has an impedance of 200 kohm. Frequency range is 10 Hz - 50 kHz (±0.5 dB, 5 W). THD is below 0.05% at 1 kHz and 5 W into 8 ohms in ultralinear mode, and Canor quotes 0.0028% at 1 W, 0.011% at 5 W and 0.13% at 50 W. Signal-to-noise ratio exceeds 103 dB (20 Hz - 80 kHz). It runs from 230 V, 50-60 Hz at 410 VA, measures 450 x 210 x 450 mm (W x H x D), or 505 mm deep with knob and connectors, and weighs 40 kg net.
Engineering and use context
Canor uses a supersymmetric circuit design and a solid aluminium chassis against vibration. A rear switch selects feedback or zero global feedback at once, and front-panel UL and TR buttons switch between ultralinear and triode operation. The power transformer core is vacuum impregnated, the whole transformer is encapsulated in an anti-vibration compound, and a massive welded cover gives electromagnetic shielding. Filtration capacity is 3,900 µF at 550 V, with a choke under the welded cover to remove anode voltage ripple. The permalloy output transformers were designed specifically for this amplifier.
Only polypropylene capacitors sit in the signal path, and its conductors are slow-drawn oxygen-free copper coated with pure silver. Boards are made with CMT (Canor PCB Milling Technology), which Canor says brings the PCB loss tangent close to that of air. At switch-on, a controlled 45-second sequence preheats the tubes, and a cooling cycle runs at switch-off. The ECC81 and ECC82 sit under anti-resonance covers. Spikes, spike shoes and a trigger cable come in the box.
Pairing
A preamplifier with balanced XLR outputs is required. The matching preamplifier is the Canor Hyperion P1, linked by the trigger input and output. Dedicated 4-ohm and 8-ohm speaker terminals are provided.
Alternatives
Canor offers no other mono power amplifier besides the Virtus M1.