Hifiverse

Power amplifiers mono - NAT Transmitter EVO

Description, images, technical data and specifications

NAT Transmitter EVO
Image source - (c) NAT

The Transmitter EVO is a single-ended, class A tube monoblock from NAT Audio, the Serbian company that has built amplifiers of this kind since the 1990s. After several years in production, NAT revised it from September 2024. Its output stage uses a single Philips (or equivalent western) QB5/1750 transmitting tube, also known as 6079, in a direct heated triode connection.

Key specs that matter

NAT specifies a single-ended class A triode amplifier with a maximum of 80 W at 1 kHz into 4 or 8 ohms, and a low-power mode of 40 W. Frequency response is 8 Hz - 60 kHz into 4 or 8 ohms. Input impedance is 100 kohms, input sensitivity is 1.0 V RMS for 80 W and gain is 28 dB (x25). Noise is 110 dB below rated output, A-weighted. Power requirement is 100 - 250 V AC at 50 - 60 Hz and 370 VA, with the mains voltage set at the factory. Each monoblock measures 360 x 640 x 310 mm (W x D x H) and weighs about 40 kg unpacked, or about 100 kg per pair in flight cases.

Engineering and use context

The QB5/1750 has a maximum heat dissipation of 565 W, and the Transmitter EVO uses only 35% of it. According to NAT this lowers the working temperature for reliability. The mechanical construction of the tube keeps it free of microphonics. In low-power mode the power consumption and heat dissipation of the output tube fall further.

Input and driver stages use a double triode of military standard, N.O.S. grade. Signal coupling is direct, with no capacitor or interstage transformer in the signal path, and there is zero global feedback. A wide-bandwidth output transformer is custom designed for NAT.

Its power supply is designed for twice the power the amplifier consumes and has additional polypropylene capacitors. Every stage, the output stage included, has a regulated high-voltage supply and a regulated filament supply. A soft start on the filament supply avoids inrush stress at turn-on, and an automatic bias circuit sets the output tube current without adjustment. Parts include graphite military-grade power resistors, Vishay 0.1% resistors, Cornell Dubilier low-ESR capacitors and pure silver OFC input wiring.

The modular chassis is hand assembled with extensive use of CNC machining. A 15 mm aluminium front panel and a stainless steel cover cage are used, and inputs are gold-plated PTFE-insulated RCA. The standard pseudo-balanced input can be upgraded to a pure-balanced input with a hand-wound nano-crystalline core transformer.

Pairing

NAT rates the Transmitter EVO to drive loudspeakers from 2 ohms to over 16 ohms. The 40 W mode is intended for sensitive loudspeakers. A preamplifier with an RCA output is required.

Alternatives

The NAT Magma EVO is the brand's larger single-ended monoblock, with a GM100 direct heated triode and 170 W output.

Specifications

  • Model name

    Transmitter EVO

  • Input sensitivity (mV)

    N/A

  • Input impedance (balanced) (Ω)

    N/A

  • Input impedance (single-ended) (Ω)

    N/A

  • Output impedance (balanced) (Ω)

    N/A

  • Output impedance (single-ended) (Ω)

    N/A

  • Max current (A)

    N/A

  • Output power (8Ω) (W)

    N/A

  • Output power (4Ω) (W)

    80

  • Gain (dBu)

    N/A

  • Frequency response low +/- 3dB (Hz)

    8

  • Frequency response high +/- 3dB (Hz)

    60000

  • Signal to Noise Ratio (dB)

    110

  • Total Harmonic Distortion + Noise (0% global feedback) (%)

    N/A

  • Total Harmonic Distortion + Noise (100% global feedback) (%)

    N/A

  • Max power consumption (W)

    N/A

  • Damping factor

    N/A

  • Dimensions (mm)

    360 x 640 x 310

  • Weight (kg)

    40

  • Official link

Related content

More components