Hifiverse

Power amplifiers mono - YBA SIGNATURE MONO POWER AMPLIFIER

Description, images, technical data and specifications

YBA SIGNATURE MONO POWER AMPLIFIER
Image source - (c) YBA

The Signature Mono is a mono power amplifier from the French manufacturer YBA and, in YBA's words, the most recent product added to the Signature range. It is a derivative of the Signature Stereo power amplifier, and a stereo system uses two units. In the UK a pair was listed at GBP 32,000, with a 5-year warranty.

Key specs that matter

Rated output is 200 W into 8 ohms and 400 W into 4 ohms. Frequency response is 20 Hz - 20 kHz (-0.5 dB), THD+N is below 0.1% (20 Hz - 20 kHz), and SNR is above 95 dB. Inputs are one RCA, one balanced input for stereo use and one balanced input for mono use. A single speaker output can be single-wired or bi-wired. Power comes from a linear power supply with a UI-CORE transformer rated at 1000 VA. Standby consumption is below 0.5 W. Each unit measures 430 x 390 x 170 mm (W x D x H) and weighs 42.5 kg, and the finish is natural aluminium.

Engineering and use context

YBA milled the chassis from a solid block of aluminium. Besides rigidity, this structure provides internal boundaries free from electromagnetic interference and carries components on two levels, fixed on either side of the central portion. Its output transistors are mounted on a solid aluminium block with mica wafers to improve heat dissipation and avoid thermal distortion. They are specially selected to be matched, all materials in the build are non-magnetic, and the transformers are suspended to reduce the transmission of their vibrations to the circuit. Input stages are housed in enclosures filled with damping materials and calibrated synthetic diamonds, and the amplifier stands on three feet.

The circuit is completely symmetrical, and the signal passes only through transistors, with no passive components in the signal path. A complementary double differential input stage is followed by a pre-driver stage, a third voltage amplification stage and an output stage directly coupled to the loudspeaker. Bandwidth decreases from input to output stage. The output stage has no feedback, and overall feedback is below 20 dB. YBA calls the design class Alpha - the power supply works as in class A, while the power stage follows the power demand, so the amplifier runs cool.

Touching the YBA logo on the front panel switches between on and standby, and the display shows the music signal level.

Pairing

The amplifier is designed for 8 or 4 ohm loudspeakers. A preamplifier with RCA or balanced outputs is required, and the matching model is the Signature Pre-Amplifier MKII. For bi-wiring, the high frequencies connect to terminals A and the low frequencies to terminals B.

Alternatives

YBA makes no other dedicated mono power amplifier.

Specifications

  • Model name

    SIGNATURE MONO POWER AMPLIFIER

  • Input sensitivity (mV)

    N/A

  • Input impedance (balanced) (Ω)

    N/A

  • Input impedance (single-ended) (Ω)

    N/A

  • Output impedance (balanced) (Ω)

    N/A

  • Output impedance (single-ended) (Ω)

    N/A

  • Max current (A)

    N/A

  • Output power (8Ω) (W)

    200

  • Output power (4Ω) (W)

    400

  • Gain (dBu)

    N/A

  • Frequency response low +/- 3dB (Hz)

    20

  • Frequency response high +/- 3dB (Hz)

    20 000

  • Signal to Noise Ratio (dB)

    >95

  • Total Harmonic Distortion + Noise (0% global feedback) (%)

    N/A

  • Total Harmonic Distortion + Noise (100% global feedback) (%)

    <0.1

  • Max power consumption (W)

    N/A

  • Damping factor

    N/A

  • Dimensions (mm)

    430 x 390 x 170

  • Weight (kg)

    42.5

  • Official link