Hifiverse

Power amplifiers mono - Alluxity Mono One

Description, images, technical data and specifications

Alluxity Mono One
Image source - (c) Alluxity

Mono One is a monoblock power amplifier from Alluxity of Herning, Denmark, and with 250 W per channel it is the most powerful amplifier in the brand's range. Alluxity is the work of Alexander Vitus-Mogensen, son of Hans-Ole Vitus of Vitus Audio, and all engineering, development and manufacturing are carried out in-house in Herning. The company belongs to AVA Group A/S. In the UK a pair cost about GBP 18,200.

Key specs that matter

Rated output is approximately 250 W into 8 ohms, 500 W into 4 ohms and 1000 W into 2 ohms (RMS). Inputs are one RCA and one XLR, with 10 kohm input impedance and an input sensitivity of 0.7 Vrms (RCA) and 1.4 Vrms (XLR). Output impedance is 75 milliohms. Each unit has a 600 VA transformer and 120,000 µF of capacitance. Frequency response extends beyond 800 kHz, THD+N is given as 0.01%, and the signal-to-noise ratio is above 100 dB. Power consumption is 45 W with no load. Dimensions are 435 x 105 x 335 mm (W x H x D), and weight is 17.5 kg.

Engineering and use context

Alluxity builds the Mono One in the same 435 x 105 x 335 mm chassis as the Int One and Power Two. Against the 40,000 µF per channel of the Power Two stereo amplifier, a single Mono One channel carries three times the reservoir capacitance behind the same 600 VA transformer rating. Like all Alluxity casework, the enclosure is carved from a solid slab of aluminium.

On the front panel sits a 5-inch, 800 x 480 pixel resistive touch display. For the power amplifiers it gives three functions - input change between XLR and RCA, display brightness and standby. Once the amplifier has run for more than 10 minutes, the selected input is stored as the default. Holding the brightness icon for 1.5 seconds turns the backlight off.

Standard finishes are black, white, titanium (grey) and titanium orange, and custom colours are available on request. Alluxity's current amplifier line consists of the Int One mkII integrated amplifier, the Pre Two streaming preamplifier, the Power Two and the Mono One.

Pairing

Two units are required for a stereo system. The matching preamplifier is the Pre Two, connected over XLR. A preamplifier with an RCA or XLR output is required.

Alternatives

Alluxity makes no other monoblock power amplifier.

Specifications

  • Model name

    Mono One

  • Input sensitivity (mV)

    N/A

  • Input impedance (balanced) (Ω)

    N/A

  • Input impedance (single-ended) (Ω)

    N/A

  • Output impedance (balanced) (Ω)

    N/A

  • Output impedance (single-ended) (Ω)

    N/A

  • Max current (A)

    N/A

  • Output power (8Ω) (W)

    N/A

  • Output power (4Ω) (W)

    N/A

  • Gain (dBu)

    N/A

  • Frequency response low +/- 3dB (Hz)

    N/A

  • Frequency response high +/- 3dB (Hz)

    N/A

  • Signal to Noise Ratio (dB)

    N/A

  • Total Harmonic Distortion + Noise (0% global feedback) (%)

    N/A

  • Total Harmonic Distortion + Noise (100% global feedback) (%)

    N/A

  • Max power consumption (W)

    N/A

  • Damping factor

    N/A

  • Dimensions (mm)

    N/A

  • Weight (kg)

    N/A

  • Official link