Hifiverse

Power amplifiers mono — PS Audio M700 Amplifier

Description, images, technical data and specifications

PS Audio M700 Amplifier
Image source - (c) PS Audio

The Stellar M700 is a mono power amplifier from PS Audio of Boulder, Colorado, the company Paul McGowan founded in 1973. Sold as a pair, one monoblock per speaker, it is the top power amplifier of the Stellar line. The price is USD 3,498 per pair in black or silver.

Key specs that matter

Output power is 350 W minimum into 8 ohms and 700 W minimum into 4 ohms (120 V AC mains, 1 kHz, 1% THD), and the M700 is stable into 2 ohms on transients. Gain is 30.5 dB (±0.5 dB), and sensitivity for rated output power is 1.6 V. Input impedance is 50 kohm unbalanced and 100 kohm balanced. Output impedance is below 0.007 ohm (50 Hz, 2.8 V RMS), and damping factor is above 1100 into 8 ohms and above 550 into 4 ohms. Frequency response is 10 Hz - 20 kHz (±0.5 dB) and 10 Hz - 50 kHz (+0.1/-3.0 dB) at 2.8 V RMS into 4 ohms. THD is below 0.1% from 20 Hz to 20 kHz at rated power, below 0.02% at 1 kHz and 1 W into 4 ohms, and below 0.015% at 87.5 W into 4 ohms. Noise at 1 kHz and 700 W is below -105 dB. Each unit measures 432 x 76 x 305 mm (W x H x D) and weighs 5.9 kg.

Engineering and use context

PS Audio combines a Class D output stage with a discrete Class A input stage called the Analog Cell. This Analog Cell is a proprietary, fully differential, zero feedback, discrete Class A MOSFET circuit. The output stage is based on a Class D ICE module and is supplied by a large power supply. Very little heat is produced, and idle power consumption is 23 W.

On the rear panel are an RCA unbalanced input, a true balanced XLR input, two pairs of copper-base nickel-plated binding posts, an IEC C14 mains inlet and a 3.5 mm DC trigger input for 5-15 V DC. A standby switch is on the front panel. Mains voltage is factory set to 100, 120 or 230 V. Two units stack to a height of 152 mm, and the warranty covers parts and labour for three years.

Pairing

A preamplifier or a DAC with built-in volume control is required. The matching PS Audio models are the StellarGold Preamplifier and the PMG Signature 512 DAC. Its inputs accept unbalanced RCA or balanced XLR connections.

Alternatives

The M1200 is the higher-powered monoblock pair from PS Audio, rated at 600 W into 8 ohms with a vacuum tube input stage.

Specifications

  • Model name

    M700 Amplifier

  • Input sensitivity (mV)

    N/A

  • Input impedance (balanced) (Ω)

    100 000

  • Input impedance (single-ended) (Ω)

    50 000

  • Output impedance (balanced) (Ω)

    N/A

  • Output impedance (single-ended) (Ω)

    N/A

  • Max current (A)

    N/A

  • Output power (8Ω) (W)

    350

  • Output power (4Ω) (W)

    700

  • Gain (dBu)

    30.5

  • Frequency response low +/- 3dB (Hz)

    10

  • Frequency response high +/- 3dB (Hz)

    50 000

  • Signal to Noise Ratio (dB)

    N/A

  • Total Harmonic Distortion + Noise (0% global feedback) (%)

    N/A

  • Total Harmonic Distortion + Noise (100% global feedback) (%)

    < 0.05

  • Max power consumption (W)

    N/A

  • Damping factor

    >1100

  • Dimensions (mm)

    432 × 76 × 305

  • Weight (kg)

    5.9

  • Official link