The M1.2 Reference is a hybrid mono power amplifier designed by Vladimir Lamm for Lamm Industries of New York. It is the top model of Lamm's hybrid and solid-state line. One tube is used in the driver stage, and the MOSFET output stage operates in pure class A. Lamm supplies the M1.2 Reference in pairs, one chassis per channel.
Key specs that matter
Output power is 110 W in class A into 8 or 4 ohms, with switch-selectable bias and voltage settings for each load. Input impedance is 41 kohms for both balanced and single-ended inputs, and output impedance is 0.082 ohms. Frequency response is 4 Hz - 155 kHz (+0/-3 dB), slew rate is 33.5 V/µs and the damping factor is 98 (8 ohms). Typical power consumption is 330 W, the same at idle and at rated output. Each chassis measures about 210 x 430 x 570 mm with handles and weighs 31 kg.
Engineering and use context
Signal enters through RCA or XLR inputs. Two high-speed buffers, originally developed for video applications, follow the inputs and drive a differential cascode stage of matched J-FET pairs with matched PNP transistors. After the cascode comes a single 6922/ECC88 double triode, followed by a single-ended stage of two NPN transistors, one of which is a high-power current source. Local feedback of 6 - 7 dB is taken from the driver stage to the input, and there is no global loop feedback around the output stage.
Its driver is capacitively coupled to six pairs of high-speed MOSFETs in the output stage, all biased into class A, with no crossover distortion. Short-circuit protection is built in, and handles are mounted on the front and rear of each chassis.
Pairing
The bias switch allows 4 ohm or 8 ohm loudspeakers. Loudspeakers with a sensitivity of 86 dB and above are recommended. The matching preamplifier is the Lamm L2.1 Reference, with remote on/off for Lamm power amplifiers.
Alternatives
The Lamm Industries ML2.2 is the single-ended tube mono power amplifier of the range, intended for high-sensitivity loudspeakers.