Hifiverse

Power amplifiers mono - Alexandria Audio Legatus

Description, images, technical data and specifications

Alexandria Audio Legatus
Image source - (c) Alexandria Audio

The Legatus is a hybrid monoblock power amplifier from Alexandria Audio of Bali, Indonesia, sold as a pair at USD 8,500. Alexandria Audio was founded in Bali in 2019 by Kenneth Lin and Henry Kristanto, and the Legatus is its first amplifier. After the circuit design was started, two years of research and development went into the circuitry and another year into making it manufacturable. A tube buffer input stage is combined with a Hypex NcX500 Class D output stage.

Key specs that matter

Power rating is 100 W continuous (380 W peak) into 8 ohms and 200 W continuous (700 W peak) into both 4 and 2 ohms. Inputs are balanced XLR and RCA, with 100 kohms input impedance and a maximum input level of 8 V AC. Output impedance is listed as 4/8/16 ohms. Frequency response is 2 Hz - 200 kHz. Each unit measures 480 x 165 x 380 mm (W x H x D), and weight is 30.0 kg. Mains input is 115 or 230 V AC with T5A slow-blow mains fuses, and power consumption is 40 - 800 W.

Engineering and use context

Its output stage is based on the Hypex NcX500, a further development of the NCORE module, and Alexandria quotes distortion of -130 dB for it. In front of the module sits a tube-based buffer with 5687 tubes. Feedback is optional - a DIP switch turns it off for zero-feedback operation.

Each channel has its own chassis, so signal and signal ground are completely separated between channels. Inside every monoblock are two independent power supply circuits, one for the tube front end input stage and one for the output stage, and each stage can be fine-tuned separately. According to Alexandria, all capacitors and resistors on the main board are individually pre-measured and selected into groups with an accuracy of between 0.1 and 0.001%. Housing is a compartmentalised high-grade steel chassis with an aluminium faceplate, chosen to control resonance. Every Legatus is individually fine-tuned and evaluated before it is packed and shipped.

Pairing

A preamplifier with balanced XLR or RCA outputs is required. Continuous power is rated into loads down to 2 ohms. Two units are needed for stereo.

Alternatives

Alexandria Audio makes no other power amplifier, mono or stereo.

Specifications

  • Model name

    Legatus

  • Input sensitivity (mV)

    N/A

  • Input impedance (balanced) (Ω)

    100 000

  • Input impedance (single-ended) (Ω)

    100 000

  • Output impedance (balanced) (Ω)

    N/A

  • Output impedance (single-ended) (Ω)

    N/A

  • Max current (A)

    N/A

  • Output power (8Ω) (W)

    100

  • Output power (4Ω) (W)

    N/A

  • Gain (dBu)

    N/A

  • Frequency response low +/- 3dB (Hz)

    2

  • Frequency response high +/- 3dB (Hz)

    200 000

  • Signal to Noise Ratio (dB)

    N/A

  • Total Harmonic Distortion + Noise (0% global feedback) (%)

    N/A

  • Total Harmonic Distortion + Noise (100% global feedback) (%)

    N/A

  • Max power consumption (W)

    N/A

  • Damping factor

    N/A

  • Dimensions (mm)

    480 x 165 x 380

  • Weight (kg)

    30

  • Official link