Hifiverse

Power amplifiers mono - Kondo Audio Note Japan Gakuoh II

Description, images, technical data and specifications

Kondo Audio Note Japan Gakuoh II
Image source - (c) Kondo Audio Note Japan

The Gakuoh II is a 300B push-pull monaural power amplifier from Kondo Audio Note Japan. One unit is required per channel. Kondo builds it on a full copper chassis with silver output transformers wound in-house.

Key specs that matter

Rated power is 20 W (1 kHz, 5% THD). Frequency response is 10 Hz - 40 kHz (+0/-3 dB at 1 W), and noise is less than 1 mV. The tube complement is two 300B, two 6CG7, one 6072 and two GZ34. Inputs are RCA and XLR, the XLR being unbalanced, both with an input impedance of 70 kohms. Output taps are 4, 8 and 16 ohms, with two of them preset at the factory. Power consumption is 120 W. Each amplifier measures 294 x 284 x 485 mm (W x H x D, excluding protrusions) and weighs 32 kg.

Engineering and use context

The input stage uses a 6072 as a plate follower with a direct-coupled cathode follower. A classic phase inverter circuit follows. Two 6CG7 in parallel configuration drive the 300B output tubes at low impedance, and the push-pull 300B output stage is self-biased.

Its power supply uses dual GZ34 rectification, with independent rectification circuits for the amplification stage and for the output stage. Kondo specifies silver signal capacitors, silver lead resistors and internal wiring in SSW, its silk silver wire. The output transformers are a new silver design wound with the company's in-house technique, and Kondo states that all parts on the copper chassis were selected through listening tests.

Pairing

A loudspeaker of high sensitivity is required at 20 W per channel. The output taps match 4, 8 or 16 ohm loudspeakers. Any preamplifier with RCA or unbalanced XLR outputs connects directly.

Alternatives

The Kagura2 is another monaural power amplifier in the Kondo Audio Note Japan range.

Specifications

  • Model name

    Gakuoh II

  • Input sensitivity (mV)

    N/A

  • Input impedance (balanced) (Ω)

    70 000

  • Input impedance (single-ended) (Ω)

    70 000

  • Output impedance (balanced) (Ω)

    N/A

  • Output impedance (single-ended) (Ω)

    N/A

  • Max current (A)

    N/A

  • Output power (8Ω) (W)

    20

  • Output power (4Ω) (W)

    N/A

  • Gain (dBu)

    N/A

  • Frequency response low +/- 3dB (Hz)

    10

  • Frequency response high +/- 3dB (Hz)

    40 000

  • Signal to Noise Ratio (dB)

    N/A

  • Total Harmonic Distortion + Noise (0% global feedback) (%)

    N/A

  • Total Harmonic Distortion + Noise (100% global feedback) (%)

    N/A

  • Max power consumption (W)

    120

  • Damping factor

    N/A

  • Dimensions (mm)

    294 x 284 x 485

  • Weight (kg)

    32

  • Official link