Hifiverse

Power amplifiers mono - Western Electric 97A

Description, images, technical data and specifications

Western Electric 97A
Image source - (c) Western Electric

The 97A is a tube mono power amplifier from Western Electric, sold in pairs and built in Rossville, Georgia, where the company has made its 300B triodes since the Rossville Works opened in 2018. Western Electric first produced the 300B in 1938 for cinema sound systems in Hollywood, where it was used in the wall-mounted Type 500A and Type 91A amplifier sets of the Wide Range and Mirrophonic systems. In the current range it sits beside the 91E integrated amplifier and the 116-C phono preamplifier. A pair costs USD 124,999, and Western Electric covers parts and labour for three years.

Key specs that matter

Rated power output is 80 W RMS per channel. Frequency response is 10 Hz - 100 kHz (±1 dB). Total harmonic distortion is below 0.05% at 10 W, below 0.15% at 50 W and below 0.9% at 80 W. Signal-to-noise ratio is 100 dB below 80 W, and the damping factor is 16. Input sensitivity is 0.50 V for full output, with 500 kOhms input impedance. Each chassis draws 400 W (true RMS) from a 120 V mains supply. Dimensions per channel are 435 x 825 x 275 mm (W x D x H), and net weight per channel is 74.8 kg.

Engineering and use context

Each monoblock carries eight Western Electric 300B tubes in its output stage, together with three 6SN7GTB and one 6SL7. Wiring is point-to-point, with MIL-W-16878 stranded silver-plated copper wire in PTFE insulation. On the speaker side the 97A has Common, 4-ohm and 8-ohm connections. Its front panel holds the power on/off switch and an LED power meter with Low, Medium and High segments. A toggle switch selects either the single-ended RCA or the balanced XLR input.

Pairing

A preamplifier with a single-ended RCA or balanced XLR output is required. Within the Western Electric range, the 91E in pre-amp configuration has a 600-ohm balanced XLR output. Loudspeakers connect to the 4-ohm or 8-ohm tap according to their rated impedance.

Alternatives

Western Electric has no other mono power amplifier in its range.

Specifications

  • Model name

    97A

  • Input sensitivity (mV)

    500

  • Input impedance (balanced) (Ω)

    500 000

  • Input impedance (single-ended) (Ω)

    500 000

  • Output impedance (balanced) (Ω)

    N/A

  • Output impedance (single-ended) (Ω)

    N/A

  • Max current (A)

    N/A

  • Output power (8Ω) (W)

    80

  • Output power (4Ω) (W)

    N/A

  • Gain (dBu)

    N/A

  • Frequency response low +/- 3dB (Hz)

    10

  • Frequency response high +/- 3dB (Hz)

    100 000

  • Signal to Noise Ratio (dB)

    100

  • Total Harmonic Distortion + Noise (0% global feedback) (%)

    N/A

  • Total Harmonic Distortion + Noise (100% global feedback) (%)

    <0.9 (80 W)

  • Max power consumption (W)

    400

  • Damping factor

    16

  • Dimensions (mm)

    435 x 825 x 275

  • Weight (kg)

    74.8

  • Official link