Hifiverse

Power amplifiers mono — Bryston 28B Cubed

Description, images, technical data and specifications

Bryston 28B Cubed
Image source - (c) Bryston

The 28B Cubed (28B³) is a solid-state mono power amplifier from Bryston of Canada and the most powerful model of the Cubed Series. Bryston describes it as a mono design intended for very high performance professional audio systems, and two units are needed for stereo. Each amplifier is manufactured in Peterborough, Ontario, runs 100 hours of burn-in on the test bench before shipping and comes with a performance certificate listing its own measured specifications.

Key specs that matter

Power output is 1000 W into 8 ohms and 1800 W into 4 ohms. THD+N is 0.005% or less (20 Hz - 20 kHz at 1000 W, 8 ohms), and IMD is 0.005% or less (typically 0.002%). Bandwidth is below 1 Hz to above 100 kHz (0/-3 dB), and frequency response is 20 Hz - 20 kHz (0 ±0.1 dB). Noise is -117 dB via the balanced input and -116 dB via the single-ended input (22 Hz - 22 kHz, weighted). Gain is 29 dB, and input sensitivity is 1.00 V for 100 W and 3.16 V for 1000 W into 8 ohms. Slew rate exceeds 120 V/µs, and damping factor is above 500 (20 Hz, 8 ohms). Balanced input impedance is 5 kOhm per leg. Width is 432 mm (17-inch panel) or 483 mm (19-inch panel with front handles), height 206 mm, and weight 42 kg.

Engineering and use context

Every Cubed Series amplifier uses the patented Salomie input circuit, developed with Dr Salomie. Its array of twelve active devices matches the amplifier to virtually any preamplifier, provides the first 6 dB of gain and has measured distortion below 0.001%. Bryston adds improved common-mode noise rejection and EMI/RFI rejection to this input stage. The quad-complementary output stage improves transistor matching to eliminate crossover distortion and cuts output-stage capacitance by a factor of four.

Cooling is by passive aluminium heat sinks without fans, inside a CNC-machined aluminium and steel enclosure. A microprocessor-controlled SoftStart sequence manages inrush current, and a magnetic-trip circuit breaker protects the amplifier. It also has thermal shutdown circuitry and a front-panel clipping indicator. A rear switch selects the balanced XLR or single-ended RCA input, and two pairs of insulated gold-plated binding posts accept bare wire, spades or banana plugs. The remote trigger input accepts 5 - 12 V AC or DC and passes the control voltage through. Faceplates are black or silver.

Pairing

A preamplifier or surround processor with volume-controlled line-level outputs is required. The dual binding posts allow bi-wiring, and the trigger input allows switching from the preamplifier.

Alternatives

The 7B Cubed is the smaller mono amplifier of the same series, rated at 600 W into 8 ohms and 900 W into 4 ohms.

Specifications

  • Model name

    28B Cubed

  • Input sensitivity (mV)

    N/A

  • Input impedance (balanced) (Ω)

    5000

  • Input impedance (single-ended) (Ω)

    5000

  • Output impedance (balanced) (Ω)

    N/A

  • Output impedance (single-ended) (Ω)

    N/A

  • Max current (A)

    N/A

  • Output power (8Ω) (W)

    1000

  • Output power (4Ω) (W)

    1800

  • Gain (dBu)

    N/A

  • Frequency response low +/- 3dB (Hz)

    1

  • Frequency response high +/- 3dB (Hz)

    100 000

  • Signal to Noise Ratio (dB)

    117 (XLR), 116 (RCA)

  • Total Harmonic Distortion + Noise (0% global feedback) (%)

    N/A

  • Total Harmonic Distortion + Noise (100% global feedback) (%)

    <0.005

  • Max power consumption (W)

    N/A

  • Damping factor

    N/A

  • Dimensions (mm)

    430 х 206 х 467

  • Weight (kg)

    42

  • Official link

More components