Hifiverse

Integrated amplifiers - Electric Audio TAE 150

Description, images, technical data and specifications

Electric Audio TAE 150
Image source - (c) Electric Audio

The TAE 150 is a transistor stereo integrated amplifier and the first amplifier from Electric Audio, a brand of Gauder Akustik and AMP distributed by GKS Vertriebs GmbH of Renningen. It is developed and built entirely in Germany and was new for High End Munich 2025, presented under the slogan Amps for Ages. The German price is EUR 8,498 including VAT. A Double Vision (DV) version with higher-grade parts costs extra and cannot be retrofitted.

Key specs that matter

Each channel has eight MOSFETs, and the amplifier is 2-ohm stable. Electric Audio quotes sine power of 132 W into 8 ohms, 218 W into 4 ohms and 366 W into 2 ohms, and power of 120, 200 and 300 W for the standard version and 130, 215 and 320 W for the DV, with impulse power of 140, 260 and 485 W and 155, 280 and 520 W. Maximum output current is 80 A, or 90 A for the DV. THD is 0.006% (25 W/4 ohms), S/N is 90 dB or 93 dB(A), bandwidth is 3 Hz - 170 kHz and rise time is 2.1 µs (10 V/4 ohms). The five line inputs are configured as 5 RCA, 1 XLR + 4 RCA or 2 XLR + 3 RCA. Standby consumption is 0.3 W. Dimensions are 435 x 195 x 390 mm (W x H x D), and weight is 22 kg, or 23.5 kg for the DV.

Engineering and use context

According to Electric Audio, the TAE 150 is a purely analogue design with no digital processors, no DAC and no phono input. The standard version uses a 750 VA mains transformer with 80,000 µF of filter capacitance. In the DV these become 1,000 VA and 160,000 µF, with WBT-0707 output jacks in place of WBT-0708 and a higher-quality mains cable.

Its eight WBT output jacks are wired in parallel, two pairs per channel, for one pair of speakers single-wired or bi-wired, or two pairs single-wired. Inputs 1 and 2 accept either XLR or RCA, not both at once. On the rear are a pre out on XLR and RCA following the volume control, an RJ45 link, two 5 V trigger outputs and a USB port for service and updates. Volume moves in 0.5 dB steps when the knob is turned slowly and in larger steps when it is turned fast, and it returns to -50 dB at every restart. Input sensitivity is adjustable per channel. Logo and displays offer 13 colours with adjustable brightness. The RCE 1 remote is included, and the RCE 11 in a solid aluminium housing is optional. A three-year warranty applies after online registration.

Pairing

The matching power amplifier is the PAE 150, linked by an RJ45 patch cable and a signal cable for bi-amping, with its level set from -3 to +3 dB. In that setup the bridges between the bass and mid-high speaker terminals must be removed.

Alternatives

Electric Audio makes no other integrated amplifier, as its only other model is the PAE 150 power amplifier.

Specifications

  • Model name

    TAE 150

  • Type

    Integrated Amplifier

  • Analog inputs (balanced)

    1 or 2

  • Analog inputs (single-ended)

    3, 4 or 5

  • Input sensitivity (mV)

    N/A

  • Input impedance (balanced) (Ω)

    N/A

  • Input impedance (single-ended) (Ω)

    N/A

  • Output impedance (balanced) (Ω)

    N/A

  • Output impedance (single-ended) (Ω)

    N/A

  • D/A conversion

    N/A

  • Phono MM/MC current-sensing input impedance (Ω)

    N/A

  • Output power (8Ω) (W)

    132

  • Output power (4Ω) (W)

    218

  • Gain (dBu)

    N/A

  • Frequency response low +/- 3dB (Hz)

    N/A

  • Frequency response high +/- 3dB (Hz)

    N/A

  • Signal to Noise Ratio (dB)

    N/A

  • Total Harmonic Distortion + Noise (%)

    N/A

  • Damping factor

    N/A

  • Dimensions (mm)

    435 x 195 x 390

  • Weight (kg)

    22

  • Official link

Related content