The Leak Stereo 230 is a solid-state integrated amplifier that brings together a Class AB output section, a 32-bit DAC, a moving magnet phono input, a headphone amplifier and Bluetooth reception in one chassis. The styling follows classic Leak designs, and the version described here comes in a walnut enclosure. The maker lists it at USD 1,995.
Key specs that matter
Power output is 2 x 75 W into 8 ohm and 2 x 115 W into 4 ohm. Total harmonic distortion stays below 0.003% at 1 kHz with 30 W into 8 ohm, while the quoted S/N figure is 109 dB or better, A-weighted and referenced to 45 W. Frequency response is 20 Hz to 20 kHz within plus or minus 0.3 dB. Digital conversion uses the ESS ES9038Q2M chip. Analogue connections cover two RCA line inputs labelled AUX1 and AUX2 plus one RCA phono input, and there is one RCA pre-out. Digital inputs are two optical TOSLINK and one coaxial RCA, and the unit also has optical and coaxial digital outputs. Bluetooth supports A2DP with aptX taking priority over SBC. The case measures 326 x 146 x 411 mm and weighs 12.7 kg.
Engineering and use context
The ES9038Q2M runs on the 32-bit HyperStream architecture with a Time Domain Jitter Eliminator, and the digital section accepts PCM up to 768 kHz as well as DSD512. The phono stage is a JFET-based circuit built for moving magnet cartridges, with RIAA equalisation applied inside the amplifier, so a turntable can connect directly. A separate headphone amplifier circuit uses current feedback and a high slew rate rather than simply tapping the speaker outputs. The pre-out lets the Stereo 230 drive an external power amplifier or an active subwoofer, and the digital outputs pass a signal on to another component such as a recorder or a second converter. Having conversion, phono and Bluetooth inside one case reduces the number of boxes and interconnects on the rack.
Pairing
The rating into low impedance shows the output stage is built to handle lower impedance loudspeakers, so most passive bookshelf and floorstanding models with average sensitivity, used in about 20 m2, are a workable match. A CD transport or TV with an optical output can feed the TOSLINK inputs, a network streamer with coaxial output can use the RCA digital input, and any turntable fitted with an MM cartridge plugs directly into the phono socket. Owners who prefer an MC cartridge would have to add an external step-up device.
Alternatives
The Leak Stereo 130 is a lower-powered integrated model within the current Leak line-up.