Hifiverse

Integrated amplifiers - SPEC RSA-EX1000

Description, images, technical data and specifications

SPEC RSA-EX1000
Image source - (c) SPEC

The RSA-EX1000 is a Class D integrated amplifier from SPEC Corporation, a Tokyo company founded in 2010. SPEC calls it a 200 W Real-Sound Amplifier. It can be used as a standalone integrated amplifier or as a power amplifier with an existing preamplifier. The price is JPY 7.2 million before VAT in Japan and USD 42,000 in North America.

Key specs that matter

Maximum output is 200 W x 2 into 4 ohms, for speakers of 4 - 16 ohms nominal impedance. Frequency response is 10 Hz - 30 kHz (±1 dB). Line inputs are two balanced XLR and three unbalanced RCA, and one set of speaker terminals accepts Y lugs and banana plugs. Power consumption is 15 W with no signal and 500 W at maximum output (8 ohms, 100 Hz). Dimensions are 450 x 180 x 523.5 mm (W x H x D), and the power unit weighs 28 kg.

Engineering and use context

A newly designed main circuit board keeps the wiring from the volume controller to the low-pass filter as short as possible. SPEC notes that its Class D stage generates little heat, so even a 200 W design needs only a small heat sink placed on the board. Volume is set by a high-precision, ultra-low-noise electronic volume IC.

Its power supply uses a 600 VA R-core transformer designed specially for this model. The large smoothing capacitor is held in a metal holder. SPEC blends several capacitor types and places each where it suits its function in the circuit. Important units are separated in a shielded structure, the inside of the shielded case is coated with EMC paint and lined with electromagnetic wave absorbing sheets, and the whole interior of the chassis is EMC-painted as well.

Side panels are maple, the largest side wood SPEC uses, and the chassis is laminated spruce, the combination of woods used in violins. Base chassis and insulators are natural wood. On the rear panel, two ATT switches lower LINE 3 (RCA) and LINE 5 (XLR) by 6 dB, and the balanced inputs are set about 3 dB below the RCA inputs. A remote control set with a separate receiver box is included. Its volume buttons do not turn the front volume knob, and the ATT button lowers the level by 20 - 30 dB.

Pairing

Balanced sources connect to the two XLR inputs. A separate preamplifier can be connected, with the RSA-EX1000 used as a power amplifier. The ATT switches allow a high-output source to be matched to the other inputs.

Alternatives

The RSA-G3EX is a smaller SPEC integrated amplifier, rated at 100 W x 2 into 4 ohms, with the same two XLR and three RCA inputs.

Specifications

  • Model name

    RSA-EX1000

  • Type

    N/A

  • Analog inputs (balanced)

    2

  • Analog inputs (single-ended)

    3

  • Input sensitivity (mV)

    N/A

  • Input impedance (balanced) (Ω)

    N/A

  • Input impedance (single-ended) (Ω)

    N/A

  • Output impedance (balanced) (Ω)

    N/A

  • Output impedance (single-ended) (Ω)

    N/A

  • D/A conversion

    N/A

  • Phono MM/MC current-sensing input impedance (Ω)

    N/A

  • Output power (8Ω) (W)

    N/A

  • Output power (4Ω) (W)

    2 x 200

  • Gain (dBu)

    N/A

  • Frequency response low +/- 3dB (Hz)

    10

  • Frequency response high +/- 3dB (Hz)

    30000

  • Signal to Noise Ratio (dB)

    N/A

  • Total Harmonic Distortion + Noise (%)

    N/A

  • Damping factor

    N/A

  • Dimensions (mm)

    450 × 180 × 523.5

  • Weight (kg)

    28

  • Official link

Related content