Hifiverse

Integrated amplifiers - QUAD Platina Integrated

Description, images, technical data and specifications

QUAD Platina Integrated
Image source - (c) QUAD

The Platina Integrated is the integrated amplifier of QUAD's Platina series, which also includes the Platina CDT transport and the Platina Stream. It combines a dual-mono class AB power amplifier with a DAC, an MM/MC phono stage and a headphone amplifier. QUAD states a five-year development period. Sales began in November 2025 at GBP 3,499, USD 5,495 or AUD 7,999, in a Black or Silver finish.

Key specs that matter

Rated power output is 2 x 200 W (8 ohms, THD <1%) and 2 x 310 W (4 ohms, THD <1%), with a maximum output current of 20 A. Power amplifier THD is <0.0008% (1 kHz at 100 W/8 ohms), S/N is >112 dB (A-weighted), and frequency response is 20 Hz - 20 kHz (±0.3 dB). Analogue inputs are two RCA pairs, one XLR pair and one MM/MC phono input. Digital inputs are two coaxial and two optical S/PDIF at 44.1 - 192 kHz, a USB Type-C PC input at 44.1 - 768 kHz PCM and DSD64 to DSD512, and HDMI ARC. Outputs comprise RCA and XLR pre-outs, one optical, one coaxial and a 12 V trigger. Line input impedance is 50 kohms, preamplifier output impedance is 120 ohms, and power amplifier gain is +30 dB. Dimensions are 445 x 134.5 x 348 mm (W x H x D), and net weight is 17.1 kg.

Engineering and use context

Power comes from a custom-designed 630 VA toroidal transformer with 44,000 µF of filter capacity per channel. Cascaded voltage regulators are used in both the analogue and digital sections. Bespoke capacitors were developed for this model with Wurth Elektronik, and the board uses extensive SMD component integration with short connection lines. Volume is set by a four-channel active control in steps.

Its DAC section uses the ES9038Pro 32-bit chip with two master clocks, one dedicated to 44.1 kHz multiples and one to 48 kHz multiples. Upsampling of lower-resolution PCM to 352.8 kHz or 384 kHz is available, together with five selectable reconstruction filter settings. DAC THD is <0.001% (1 kHz at 0 dBFS) with >116 dB S/N (A-weighted). The unit is Roon Tested.

QUAD describes the phono stage as a JFET design with 46, 52 or 60 dB of gain. MM loading is 50 kohms // 100 pF and MC loading is 360 ohms // 200 pF. A dedicated current-feedback headphone amplifier has 2.35 ohms output impedance for loads of 20 - 600 ohms. On the front, a 109 mm 800 x 480 IPS LCD sits between machined aluminium knobs, and firmware is updated over USB.

Pairing

The pre-outs allow a subwoofer or a larger power amplifier. Matching sources are the Platina CDT and the Platina Stream, and one remote controls all three.

Alternatives

QUAD's Vena II Play is a more compact integrated amplifier with its own DAC and streaming module.

Specifications

  • Model name

    Platina Integrated

  • Type

    N/A

  • Analog inputs (balanced)

    1

  • Analog inputs (single-ended)

    2 + 1 (MM/MC)

  • Input sensitivity (mV)

    N/A

  • Input impedance (balanced) (Ω)

    50 000

  • Input impedance (single-ended) (Ω)

    50 000

  • Output impedance (balanced) (Ω)

    120

  • Output impedance (single-ended) (Ω)

    120

  • D/A conversion

    Yes

  • Phono MM/MC current-sensing input impedance (Ω)

    N/A

  • Output power (8Ω) (W)

    200

  • Output power (4Ω) (W)

    310

  • Gain (dBu)

    30

  • Frequency response low +/- 3dB (Hz)

    20

  • Frequency response high +/- 3dB (Hz)

    20 000

  • Signal to Noise Ratio (dB)

    >110

  • Total Harmonic Distortion + Noise (%)

    <0.001

  • Damping factor

    N/A

  • Dimensions (mm)

    445 x 134.5 x 348

  • Weight (kg)

    17.1

  • Official link

Related content