Hifiverse

Integrated amplifiers - Dan D'Agostino Momentum MxV

Description, images, technical data and specifications

Dan D'Agostino Momentum MxV
Image source - (c) Dan D'Agostino

The Momentum MxV Integrated Amplifier from Dan D'Agostino Master Audio Systems combines the front-end technology of the Momentum C2 Preamplifier with the power section of the Momentum MxV amplifier. Shipping began in May 2023 at a base price of USD 65,000. The optional Digital Streaming Module (DSM) was USD 10,000 and the optional phonostage module USD 5,000. UK prices were GBP 73,998 including VAT, plus GBP 11,398 and GBP 5,698 for the two modules. Finishes are silver or black.

Key specs that matter

Output power is 250 W per channel into 8 ohms, 500 W into 4 ohms and 1,000 W into 2 ohms. Frequency response is 0.1 Hz - 100 kHz (+0/-3 dB) and 20 Hz - 20 kHz (±0.1 dB). THD is 0.05% at 1 kHz (250 W into 8 ohms). Signal-to-noise ratio is above 75 dB A-weighted and above 100 dB unweighted. Input impedance is 1 MOhm, and output impedance is 0.7 ohm. Analogue inputs are three pairs of balanced XLR and one pair of unbalanced RCA. Outputs are one pair of balanced XLR, a 6.35 mm headphone jack and two pairs of binding posts. Dimensions are 46.4 x 24.1 x 45.2 cm (W x H x D), and weight is 50.8 kg.

Engineering and use context

Two separate chassis interlock through 30-pin, 30 A gold-plated connectors. This arrangement isolates the audio signal physically and electrically from the power supply section. A 2 kVA linear transformer with toroidal winding drives a capacitor bank of nearly 60,000 µF.

In the preamplifier section, six left and right circuit boards make up the input, volume control and output sections. Its amplifier circuitry is discrete, direct-coupled and balanced, with bipolar transistors in the front end. Each channel uses 28 high-speed, high-output transistors in the output stage, the same devices sourced for the Relentless monoblock amplifiers. Every transistor is mounted for thermal transfer to copper heat sinks of the company's copper/aluminium thermal engine. A new bias stability circuit raises the operating bias by nearly 50%, and D'Agostino states that this increases Class A operation. RS-232 is provided for unit control, and the casework has no visible fasteners.

Both modules are options. The phonostage module supports low-output moving-coil cartridges with over 60 dB of gain and loading options from 100 ohms to 47 kOhms. With the DSM installed, digital inputs are S/PDIF coaxial, optical, USB, RJ45 Ethernet and Wi-Fi, with PCM up to 32-bit/192 kHz and DSD up to DSD1024. Its iOS app has Tidal, Qobuz and MQA decoding built in.

Pairing

Loudspeakers down to 2 ohms are within the rated output. A turntable with a low-output MC cartridge requires the phonostage module. Network streaming requires the DSM.

Alternatives

The Progression Integrated Amplifier is the other integrated amplifier in the Dan D'Agostino range.

Specifications

  • Model name

    Momentum MxV

  • Type

    Integrated Amplifier

  • Analog inputs (balanced)

    3

  • Analog inputs (single-ended)

    1

  • Input sensitivity (mV)

    N/A

  • Input impedance (balanced) (Ω)

    1 000 000

  • Input impedance (single-ended) (Ω)

    1 000 000

  • Output impedance (balanced) (Ω)

    0.7

  • Output impedance (single-ended) (Ω)

    0.7

  • D/A conversion

    N/A

  • Phono MM/MC current-sensing input impedance (Ω)

    N/A

  • Output power (8Ω) (W)

    250

  • Output power (4Ω) (W)

    500

  • Gain (dBu)

    N/A

  • Frequency response low +/- 3dB (Hz)

    0.1

  • Frequency response high +/- 3dB (Hz)

    100 000

  • Signal to Noise Ratio (dB)

    >100

  • Total Harmonic Distortion + Noise (%)

    0.05

  • Damping factor

    N/A

  • Dimensions (mm)

    464 x 241 x 452

  • Weight (kg)

    50.8

  • Official link