Hifiverse

Integrated amplifiers - Marantz MODEL 50

Description, images, technical data and specifications

Marantz MODEL 50
Image source - (c) Marantz

Marantz's MODEL 50 is a two-channel integrated amplifier that the company describes as pure analogue, with no digital audio circuitry. Its name revives a model number from the Marantz past. The amplifier uses a current-feedback Class A/B topology and HDAM SA2 and SA3 discrete amplifier modules instead of integrated circuits. In the US it costs USD 2,000, in Black or Silver-Gold.

Key specs that matter

Power output is 70 W per channel into 8 ohms and 100 W into 4 ohms (RMS). Frequency response is 5 Hz - 100 kHz, total harmonic distortion is 0.02% and the damping factor is 100. There are six audio inputs. High-level input sensitivity is 185 mV at 16 kohms, with a signal-to-noise ratio of 116 dB (2 V input). The MM phono input has 1.4 mV sensitivity at 47 kohms and 87 dB S/N. Power Amp Direct In is rated at 1.5 V and 15 kohms, with 125 dB S/N. Bass and treble controls give ±10 dB at 50 Hz and at 15 kHz. Power consumption is 220 W, and standby consumption is 0.3 W. Maximum dimensions are 442 x 431 x 130 mm (W x D x H), and weight is 14.2 kg.

Engineering and use context

Power comes from a toroidal transformer in a Linear Drive power supply with Schottky diodes. Its PCB layout is symmetric, the heat sinks are aluminium extrusions, the bottom plate is triple-layer and the volume control is linear. On the phono side, the MM equalisation stage uses a new circuit without coupling capacitors.

Source Direct and Power Amp Direct modes are provided. There is a stereo pre-out with a subwoofer output, along with Speaker A/B switching on Marantz SPKT-1+ speaker terminals and a headphone output. The front panel carries the Marantz porthole OLED display for setup and volume level. D-Bus, auto power off, a detachable power cable and the RC003PMND system remote complete the specification. The US warranty is five years.

Pairing

A turntable with an MM cartridge connects to the phono input. The pre-out allows a subwoofer or an additional power amplifier. Two pairs of loudspeakers can be connected and switched as A and B.

Alternatives

The MODEL 40n is a Marantz integrated amplifier from the same generation with built-in streaming.

Specifications

  • Model name

    MODEL 50

  • Type

    Premium Integrated Stereo Amplifier with 70W and Custom HDAM

  • Analog inputs (balanced)

    N/A

  • Analog inputs (single-ended)

    6

  • Input sensitivity (mV)

    185

  • Input impedance (balanced) (Ω)

    N/A

  • Input impedance (single-ended) (Ω)

    16 000

  • Output impedance (balanced) (Ω)

    N/A

  • Output impedance (single-ended) (Ω)

    N/A

  • D/A conversion

    Yes

  • Phono MM/MC current-sensing input impedance (Ω)

    N/A

  • Output power (8Ω) (W)

    70

  • Output power (4Ω) (W)

    100

  • Gain (dBu)

    N/A

  • Frequency response low +/- 3dB (Hz)

    5

  • Frequency response high +/- 3dB (Hz)

    100 000

  • Signal to Noise Ratio (dB)

    116

  • Total Harmonic Distortion + Noise (%)

    0.02

  • Damping factor

    100

  • Dimensions (mm)

    442 x 431 x 130

  • Weight (kg)

    14.2

  • Official link

More components