Hifiverse

Integrated amplifiers - Marantz MODEL 30

Description, images, technical data and specifications

Marantz MODEL 30
Image source - (c) Marantz

The MODEL 30 is a 100 W integrated stereo amplifier from Marantz with custom HDAM circuits and a built-in MM/MC phono stage. A new system remote controller operates both the MODEL 30 and the SACD 30n player. In the US Marantz lists it at USD 3,500 in Black or Silver-Gold, with a three-year warranty.

Key specs that matter

Rated output is 100 W + 100 W into 8 ohms and 200 W + 200 W into 4 ohms. Frequency range is 5 Hz - 50 kHz, THD is 0.005% (1 kHz, 8 ohms) and the damping factor is 500. Phono input sensitivity and impedance are 2.3 mV / 39 kohms for MM, and MC input impedance is 250 ohms. CD and line inputs have 220 mV / 13 kohms, and the power amplifier input has 1.1 V / 13 kohms. Signal-to-noise ratio is 88 dB for phono MM, 75 dB for phono MC and 107 dB for CD. There are six inputs and one output - Phono (MM/MC), CD, Tuner, Line 1, Line 2 and Recorder. Power consumption is 130 W (0.2 W in standby). Dimensions are 443 x 130 x 432 mm (W x H x D), and weight is 14.8 kg.

Engineering and use context

Marantz describes a fully discrete, two-stage design with its HDAM technology. Each HDAM-SA3 module is made of dozens of independent, hand-selected parts. The power amplifier section is a Class D switching amplifier based on Hypex NC500 and SMPS600 modules. A toroidal power transformer in its own case is used, and volume is electronic.

Tone controls cover bass, treble and balance, and a Source Direct mode is provided. Its Phono and CD inputs use high-grade terminals. A power amplifier direct input (Ext. Pre) and a pre-out are on the rear panel, together with one set of Marantz Original SPKT-100+ speaker terminals and a remote control bus terminal (Cinch). It has no balanced XLR input, no optical, coaxial, USB or HDMI connections, no DAC and no network functions.

On the front panel is a porthole OLED display, and the edge lighting has a dimmer. The chassis is triple-layer SECC steel, with an aluminium front centre panel and side covers, a steel top cover, aluminium knobs and copper-plated side screws.

Pairing

A turntable with an MM or MC cartridge connects directly to the phono input. Digital sources require their own DAC, and the matching disc player is the SACD 30n. The pre-out and power amplifier direct input allow an external power amplifier or preamplifier.

Alternatives

The MODEL 50 is Marantz's 70 W Class A/B integrated amplifier with custom HDAM.

Specifications

  • Model name

    MODEL 30

  • Type

    Premium Integrated Stereo Amplifier with 100W and Custom HDAM

  • Analog inputs (balanced)

    N/A

  • Analog inputs (single-ended)

    6

  • Input sensitivity (mV)

    1100

  • Input impedance (balanced) (Ω)

    N/A

  • Input impedance (single-ended) (Ω)

    13 000

  • Output impedance (balanced) (Ω)

    N/A

  • Output impedance (single-ended) (Ω)

    N/A

  • D/A conversion

    Yes

  • Phono MM/MC current-sensing input impedance (Ω)

    39 000 (MM), 250 (MC)

  • Output power (8Ω) (W)

    2 x 100

  • Output power (4Ω) (W)

    2 x 200

  • Gain (dBu)

    N/A

  • Frequency response low +/- 3dB (Hz)

    5

  • Frequency response high +/- 3dB (Hz)

    50 000

  • Signal to Noise Ratio (dB)

    107

  • Total Harmonic Distortion + Noise (%)

    0.005%

  • Damping factor

    500

  • Dimensions (mm)

    443 x 130 x 432

  • Weight (kg)

    14.8

  • Official link

More components