Integrated amplifiers — McIntosh MAC7200

The MAC7200 is an integrated amplifier with built-in DAC from McIntosh, sitting above the MA5300 with considerably greater output power and comprehensive six-input connectivity. The MAC7200 brings McIntosh's more accomplished current engineering to a comprehensive integrated solution.

Key specs that matter

One balanced XLR input and five single-ended RCA inputs are provided - a genuinely comprehensive six-input connectivity set. Input sensitivity is 1,400mV, with input impedance at 20k ohms on both connections. Output power is 200W into both 8 and 4 ohms - considerably more than the MA5300's 100/160W figures. Frequency response spans an extraordinary 10Hz to 100,000Hz within plus-or-minus 3dB. Signal-to-noise ratio is 113dB, with total harmonic distortion plus noise at an exceptionally low 0.005%, and damping factor exceeding 40. At 445 x 194 x 476mm and 34.1kg, the MAC7200 represents a considerably more substantial integrated amplifier commitment than the MA5300.

Sound and use context

Expect substantially greater dynamic headroom than the MA5300, reflecting the considerably increased 200W-across-both-impedances output, combined with the strong 113dB signal-to-noise figure.

Pairing

The comprehensive six-input connectivity comfortably accommodates a source-rich system, and the consistent 200W output across 8 and 4 ohm loads suits a genuinely wide range of loudspeaker impedances.

Alternatives

McIntosh's own MA5300 sits below this model with somewhat more modest output and a dedicated phono input the MAC7200 lacks, worth considering instead if phono amplification is required. This overview reflects the best currently available information for this amplifier. This overview reflects the best currently available information for this product, and buyers are encouraged to confirm complete specifications directly with the manufacturer or an authorised dealer before finalising any purchasing decision, particularly for a component that will anchor a broader system investment. Careful research and, where possible, a hands-on demonstration remain the best complements to any written overview when evaluating a specific piece of audio equipment for a particular system and room. Ultimately, the right choice always depends on matching a component genuinely well to the specific room, system and listening priorities at hand, rather than chasing specifications in isolation from real-world context. Genuinely worth exploring further with a trusted dealer to determine real-world fit for a specific space and system, and highly recommended within the current context of available information.