Hifiverse

Integrated amplifiers - Micromega M-Amp Solo

Description, images, technical data and specifications

Micromega M-Amp Solo
Image source - (c) Micromega

Micromega of France makes the M-Amp Solo, an integrated amplifier that combines a class AB power section, an internal DAC and an MM phono input. Its design draws on the Solo Plexi range of the 1990s, and its electronics are derived from the M-One of 2016. Development took three years. R&D is carried out in Paris under engineer Florian Menguy, Eiffage Electronique produces the circuit boards in Verquin, and final assembly and testing are done by hand at La Manufacture du Son in Hossegor. The price is EUR 3,000, or EUR 3,199 with the Escape M1 AIR streamer, and availability started in January 2026.

Key specs that matter

Rated output is 2 x 85 W into 8 ohms and 2 x 105 W into 4 ohms (RMS, 0.1% THD). THD at 2 x 50 W into 8 ohms is below 0.002% at 63 Hz, 0.003% at 1 kHz and 0.005% at 10 kHz. Signal-to-noise ratio (A-weighted) is above 117 dB on the digital inputs (0 dBFS), above 93 dB on the single-ended analogue input (2 V RMS) and above 73 dB on the MM phono input (10 mV RMS). Residual output noise is below 600 µV. Input sensitivity is 12 mV RMS for MM phono (47 kohms) and 2 V RMS for line. D/A conversion uses an ESS ES9280AQ PRO. Its square chassis measures 350 x 350 mm and weighs 11 kg.

Engineering and use context

Micromega chose a linear power supply with a toroidal transformer over a switch-mode supply, citing the higher noise of the latter. Inputs are RCA line, MM phono, optical, coaxial and asynchronous USB, plus a USB port for firmware updates. On the output side there are a subwoofer output with a 320 Hz cut-off frequency, a headphone output and a pre-out. Standby consumption is below 0.5 W.

Aluminium and plexiglass are the chassis materials. In the standard version a plexiglass cover sits on top, a reference to the original Solo, and a version without the plexiglass is also listed. Network playback comes from the optional Escape M1 AIR, a removable external module that is Roon Ready. It receives high-resolution streams and leaves D/A conversion to the DAC inside the amplifier. A remote control is supplied, and Micromega gives a two-year warranty.

Pairing

A moving-coil cartridge requires an external step-up device or phono stage connected to the line input. The subwoofer output connects an active subwoofer, and the pre-out connects an external power amplifier. Network streaming requires the Escape M1 AIR or another streamer.

Alternatives

The M-One M150 of 2016 is the earlier Micromega integrated amplifier from which the M-Amp Solo electronics are derived.

Specifications

  • Model name

    M-Amp Solo

  • Type

    Integrated Amplifier with DAC

  • Analog inputs (balanced)

    N/A

  • Analog inputs (single-ended)

    1 + Phono

  • Input sensitivity (mV)

    N/A

  • Input impedance (balanced) (Ω)

    N/A

  • Input impedance (single-ended) (Ω)

    N/A

  • Output impedance (balanced) (Ω)

    N/A

  • Output impedance (single-ended) (Ω)

    N/A

  • D/A conversion

    Yes

  • Phono MM/MC current-sensing input impedance (Ω)

    47 000 (MM)

  • Output power (8Ω) (W)

    2 x 85

  • Output power (4Ω) (W)

    2 x 105

  • Gain (dBu)

    N/A

  • Frequency response low +/- 3dB (Hz)

    N/A

  • Frequency response high +/- 3dB (Hz)

    N/A

  • Signal to Noise Ratio (dB)

    >117

  • Total Harmonic Distortion + Noise (%)

    0.003

  • Damping factor

    N/A

  • Dimensions (mm)

    N/A

  • Weight (kg)

    N/A

  • Official link