Hifiverse

Integrated amplifiers — MasterSound Gemini

Description, images, technical data and specifications

MasterSound Gemini
Image source - (c) MasterSound

The Gemini is an integrated tube amplifier from MastersounD of Arcugnano near Vicenza, handcrafted in Italy. It uses a parallel push-pull class A circuit with zero global feedback. The package includes a complete set of selected tubes, usually already installed.

Key specs that matter

Output is 2 x 49 W RMS. Tube complement is four ECC802S in the preamplifier/driver stage and four KT150 in the parallel push-pull output stage. Inputs are three RCA line inputs (CD, Tape, Tuner), one MM phono input (47 kohms, 5 mV) and one balanced Aux input on XLR. Input impedance is 50 kohms and input sensitivity is 1 V. Frequency response is 14 Hz - 22 kHz (0 dB). Speaker outputs have 4 and 8 ohm taps. Dimensions are 460 x 415 x 275 mm (W x D x H), weight is 31 kg, and power consumption is 427 W.

Engineering and use context

Bias is automatic and adjustable. The output transformers are custom MastersounD designs, and the tubes are selected and matched. Volume is set by an Alps potentiometer, and a radio-frequency remote control housed in solid walnut adjusts it remotely. A ground terminal on the rear panel is provided for the turntable ground lead.

Two outputs are provided. Pre connects to an external power amplifier, active subwoofer or active speakers, while Line is a fixed-level output for recording devices. The unit is factory-set for 230 V 50 Hz or 110-120 V 60 Hz mains. MastersounD gives a 5-year limited warranty, tubes excluded, and quotes a typical tube life of 5,000 to 10,000 hours.

Pairing

Loudspeakers of 4 or 8 ohms nominal impedance connect to the matching taps. An MM cartridge connects directly to the phono input, while an MC cartridge requires a step-up transformer or an external phono stage.

Alternatives

The Duetrenta is a MastersounD integrated amplifier with a parallel single-ended class A circuit, four KT120 output tubes and 30 W per channel in pentode mode.

Specifications

  • Model name

    Gemini

  • Type

    Integrated Amplifier with Phono

  • Analog inputs (balanced)

    1

  • Analog inputs (single-ended)

    3 + 1 (Phono)

  • Input sensitivity (mV)

    N/A

  • Input impedance (balanced) (Ω)

    50 000

  • Input impedance (single-ended) (Ω)

    50 000

  • Output impedance (balanced) (Ω)

    N/A

  • Output impedance (single-ended) (Ω)

    N/A

  • D/A conversion

    N/A

  • Phono MM/MC current-sensing input impedance (Ω)

    N/A

  • Output power (8Ω) (W)

    2 x 50

  • Output power (4Ω) (W)

    N/A

  • Gain (dBu)

    N/A

  • Frequency response low +/- 3dB (Hz)

    14

  • Frequency response high +/- 3dB (Hz)

    22 000

  • Signal to Noise Ratio (dB)

    N/A

  • Total Harmonic Distortion + Noise (%)

    N/A

  • Damping factor

    N/A

  • Dimensions (mm)

    450 x 430 x 270

  • Weight (kg)

    31

  • Official link

More components