Hifiverse

Integrated amplifiers — Audia Flight FLS 10

Description, images, technical data and specifications

Audia Flight FLS 10
Image source - (c) Audia Flight

The FLS 10 is a fully balanced dual mono integrated amplifier from Audia Flight of Italy, part of the company's FLS range. It is sold as a line-only unit or with factory-installed DAC and phono boards, which slot into two removable bays at the rear. The line-only version costs USD 12,999, and a unit with both boards USD 16,997.

Key specs that matter

Output is 200 W per channel into 8 ohm, 380 W into 4 ohm and 700 W into 2 ohm, and the amplifier is stable down to 2 ohm loads. Frequency response is 0.3 Hz to 500 kHz at minus 3 dB. THD plus noise is below 0.05%, signal to noise ratio is 110 dB and the damping factor into 8 ohm exceeds 650. Input impedance is 47 kohm, and the volume range spans minus 90 dB to plus 10 dB. Sources plug into a pair of XLR inputs or one of three RCA inputs, and the rear also holds RCA and XLR preamp outputs, an RCA record output and two pairs of speaker binding posts. The chassis measures 450 x 180 x 440 mm and weighs 36 kg.

Engineering and use context

The power stage works in Class AB with discrete components. A 2000 VA toroidal transformer supplies twelve independent power supplies with a total capacitance of 288,000 uF. Audia Flight lists mains draw as 1 W at idle, 170 W at nominal output and 840 W at full power. The optional DAC board handles PCM up to 32 bit and 384 kHz and DSD512 through USB-B, optical, AES/EBU and S/PDIF inputs. The optional MM and MC phono board has selectable impedance and loading, so both cartridge types can be matched from the rear panel. Input names can be edited, unused inputs deactivated and gain trimmed by 6 dB either way for each source. An independent headphone amplifier is built in. The front carries an OLED display, an aluminium remote control is supplied, and the unit comes in black or silver with a two-year warranty. The DAC board costs USD 2,499 and the phono board USD 1,499, and either can be installed by Audia Flight before delivery.

Pairing

The two pairs of binding posts make bi-wiring possible without extra hardware, and the low-impedance ratings mean demanding speakers are within the stated operating range. Balanced sources connect to the two XLR inputs, for example the FLS 20 SACD player from the same series. The preamp outputs can feed a further power amplifier or a powered subwoofer.

Alternatives

The Audia Flight FLS9 is a smaller integrated amplifier from the brand with a lower power rating and a lighter chassis.

Specifications

  • Model name

    FLS 10

  • Type

    Integrated Amplifier with DAC

  • Analog inputs (balanced)

    2

  • Analog inputs (single-ended)

    3

  • Input sensitivity (mV)

    N/A

  • Input impedance (balanced) (Ω)

    47 000

  • Input impedance (single-ended) (Ω)

    47 000

  • Output impedance (balanced) (Ω)

    N/A

  • Output impedance (single-ended) (Ω)

    N/A

  • D/A conversion

    Yes

  • Phono MM/MC current-sensing input impedance (Ω)

    N/A

  • Output power (8Ω) (W)

    200

  • Output power (4Ω) (W)

    380

  • Gain (dBu)

    90

  • Frequency response low +/- 3dB (Hz)

    0.3

  • Frequency response high +/- 3dB (Hz)

    500 000

  • Signal to Noise Ratio (dB)

    110

  • Total Harmonic Distortion + Noise (%)

    <0.05

  • Damping factor

    >650

  • Dimensions (mm)

    450x180x440

  • Weight (kg)

    36

  • Official link

More components