Hifiverse

Integrated amplifiers - Electrocompaniet ECI 6 MKII

Description, images, technical data and specifications

Electrocompaniet ECI 6 MKII
Image source - (c) Electrocompaniet

The ECI 6 MKII is a balanced integrated amplifier from Electrocompaniet of Tau, Norway. Electrocompaniet bases it on the ECI 5 MKII and gives it a stronger power supply and a more advanced preamplifier module. Its construction is modular, and the amplifier can be upgraded to the ECI 6 DX MKII.

Key specs that matter

Rated output power is 2 x 125 W into 8 ohms, 2 x 200 W into 4 ohms and 2 x 370 W into 2 ohms. Frequency response is 1 Hz - 150 kHz (-3 dB). THD+N is <0.004% (20 Hz - 20 kHz) for the amplifier section and <0.003% (1 Vrms, 20 Hz - 20 kHz, balanced) for the preamplifier section. Noise floor is <-135 dB (1 Vrms, 20 Hz - 20 kHz, balanced), and channel separation is >120 dB. Output impedance is <0.02 ohms, damping factor is >350 into 8 ohms and maximum peak current is >100 A. The balanced input has an impedance of 47 kOhm and a gain of 0 dB, and input sensitivity is 1.3 Vrms for 125 W. Dimensions are 470 x 430 x 128 mm (W x D x H, depth including speaker terminals), and weight is 20.5 kg.

Engineering and use context

Its input stage is built from discrete circuits running in class A with zero feedback. The output stage runs with moderate amounts of negative feedback. Error codes on the display cover DC fault, overload and over-temperature in each channel.

Analogue sources connect to one balanced XLR input and three single-ended RCA inputs, named CD, AUX, DVD and HT on the display. HT is a direct input with the volume control bypassed, and the ECI 6 MKII then works as a power amplifier with fixed gain of 31 dB (x36) and 1 Vrms sensitivity for 125 W. Two preamplifier outputs, one balanced and one single-ended, follow the volume and mute settings and can drive an additional power amplifier. A 12 V trigger input and output and an RS-232 control port are provided for system integration.

An IR remote control with two AAA batteries comes in the box. Power consumption is 110 W with no load or signal and 1 W in standby.

Pairing

A source with a balanced XLR output connects to the CD input. Loudspeakers down to 2 ohms are within the rated load range. The HT input accepts the front channel outputs of an AV processor.

Alternatives

The ECI 6 DX MKII is Electrocompaniet's integrated amplifier, DAC and streamer on the same platform.

Specifications

  • Model name

    ECI 6 MKII

  • Type

    Intregrated Amplifier with DAC and Streames

  • Analog inputs (balanced)

    1

  • Analog inputs (single-ended)

    N/A

  • Input sensitivity (mV)

    N/A

  • Input impedance (balanced) (Ω)

    47 000

  • Input impedance (single-ended) (Ω)

    N/A

  • Output impedance (balanced) (Ω)

    N/A

  • Output impedance (single-ended) (Ω)

    <0.004

  • D/A conversion

    Yes

  • Phono MM/MC current-sensing input impedance (Ω)

    N/A

  • Output power (8Ω) (W)

    2 x 125

  • Output power (4Ω) (W)

    2 x 200

  • Gain (dBu)

    N/A

  • Frequency response low +/- 3dB (Hz)

    1

  • Frequency response high +/- 3dB (Hz)

    150 000

  • Signal to Noise Ratio (dB)

    N/A

  • Total Harmonic Distortion + Noise (%)

    < 0,02

  • Damping factor

    N/A

  • Dimensions (mm)

    470 × 430 × 128

  • Weight (kg)

    20.5

  • Official link