Hifiverse

Integrated amplifiers - Gato Audio DIA-400S NPM

Description, images, technical data and specifications

Gato Audio DIA-400S NPM
Image source - (c) Gato Audio

The DIA-400S NPM is a Class D integrated amplifier from Gato Audio of Herlev, Denmark, with a built-in D/A converter and the NPM Network Player Module. Its S stands for Super, and the DIA-400S is a reworked DIA-400 with more than twenty changes to its circuits and layout. In the NPM version the streaming module is fully integrated, and Gato Audio calls this model its bestseller.

Key specs that matter

Output power is 2 x 400 W into 8 ohms and 2 x 800 W into 4 ohms, and the recommended speaker load is 4 - 16 ohms. Frequency response is 20 Hz - 20 kHz (-0.5 dB) and 2 Hz - 70 kHz (-3 dB). THD is below 0.01% at rated power and below 0.001% at the pre-out, with a signal-to-noise ratio above 110 dB. Voltage gain is 26 dB (+10 dB headroom). Input impedance is 20 kohms (RCA) or 40 kohms (balanced), line output impedance is 75 ohms, and maximum line-out level is 13 V balanced and 6.5 V unbalanced. Analogue inputs are one pair of Neutrik XLR and two pairs of RCA, and digital inputs are USB type B, Toslink, RCA coaxial and Bluetooth. Power consumption is below 1 W in standby, 35 W at idle and 1600 W maximum. Dimensions are 325 x 105 x 420 mm (W x H x D), and weight is 13 kg.

Engineering and use context

Gato Audio uses Class D output stages with dedicated switch mode power supplies. The multi-stage power amplifier is based on International Rectifier technology with a precision high-frequency oscillator and PWM modulator. Each stage has a pair of precision switching MOSFETs with very low on-resistance, and its output filter uses PP capacitors and low-DCR coils to convert the PWM signal back to analogue.

Inside the D/A section are a dedicated power supply, a balanced-driven Burr-Brown PCM1794 converter, a high-bandwidth I/V converter and an analogue stage with low-Q low-pass filters. All digital inputs are upsampled to 24-bit/192 kHz, and the asynchronous USB input accepts 24-bit/192 kHz.

The NPM module connects by Ethernet or Wi-Fi and is controlled directly by app or as a Roon Ready endpoint. Its NET input has a separate volume control. With the module the Bluetooth input is upgraded to version 4.2 aptX HD with 24-bit support. A Direct function bypasses the volume control for fixed-level operation, and a white LED dot-matrix display shows level, input and sample rate. Top covers come in high-gloss black, white or walnut veneer, with custom colours on request.

Pairing

The balanced and RCA line outputs and the 12 V trigger allow an external power amplifier. In a surround system the HT input sets the DIA-400S NPM to fixed-level power amplifier operation. Subscriptions to Tidal, Deezer, Qobuz or Roon are purchased separately.

Alternatives

The Gato Audio DIA-250S NPM is the lower-powered integrated amplifier with the same NPM streaming module.

Specifications

  • Model name

    DIA-400S NPM

  • Type

    Integrated Amplifier with DAC and Streamer

  • Analog inputs (balanced)

    1

  • Analog inputs (single-ended)

    2

  • Input sensitivity (mV)

    N/A

  • Input impedance (balanced) (Ω)

    40 000

  • Input impedance (single-ended) (Ω)

    20 000

  • Output impedance (balanced) (Ω)

    75

  • Output impedance (single-ended) (Ω)

    75

  • D/A conversion

    Yes

  • Phono MM/MC current-sensing input impedance (Ω)

    N/A

  • Output power (8Ω) (W)

    400

  • Output power (4Ω) (W)

    800

  • Gain (dBu)

    26

  • Frequency response low +/- 3dB (Hz)

    2

  • Frequency response high +/- 3dB (Hz)

    70 000

  • Signal to Noise Ratio (dB)

    >110

  • Total Harmonic Distortion + Noise (%)

    < 0,01

  • Damping factor

    N/A

  • Dimensions (mm)

    325 x 105 x 420

  • Weight (kg)

    11

  • Official link

More components