Hifiverse

Integrated amplifiers - Chord ANNI

Description, images, technical data and specifications

Chord ANNI
Image source - (c) Chord

Anni is Chord Electronics' first desktop integrated amplifier, from the Kent company founded by John Franks. It belongs to the Qutest range and is designed to drive both headphones and compact loudspeakers. In size and styling it complements the Qutest standalone DAC and the Huei phono stage, and the three units fit Chord's QSS (Qutest Stand System) modular equipment rack.

Key specs that matter

Power output is 10 W into 8 ohms. THD is 0.02%, signal-to-noise ratio is -92 dB, and the noise floor is -110 dB. Frequency response is 5 Hz - 60 kHz (-3 dB). Inputs are two line-level unbalanced RCA pairs. Outputs are a 3.5 mm and a 6.35 mm headphone socket, usable at the same time, and 4 mm (banana) loudspeaker terminals. Dimensions are 160 x 42.5 x 96.6 mm (W x H x D), and weight is 625 g.

Engineering and use context

Inside, Anni uses Chord's proprietary ULTIMA circuit topology, carried down from the ULTIMA amplifiers, with the dual-feed-forward error-correction circuit. Chord states that this topology allows it to drive any headphone load. The output stage is class AB with sliding bias.

Power comes from an HF switch-mode supply. An external 15 V, 6 A switch-mode adaptor with a 1.5 m lead is included in the box. Its fascia-mounted volume control is also the input selector for the two line inputs. For loudspeakers a two-stage gain control is provided, intended for a wide range of desktop monitors. Chord builds the case as a solid aluminium chassis, shown in black.

Pairing

Compact passive loudspeakers are required for speaker use. Sources with unbalanced RCA line outputs connect directly, and an XLR-only source needs an adapter. The matching DAC is the Qutest, and the matching phono stage is the Huei.

Alternatives

The Chord CPM 2800 MkII is a 120 W Signature integrated amplifier with USB, coaxial, optical and Bluetooth aptX inputs.

Specifications

  • Model name

    ANNI

  • Type

    Integrated Amplifier

  • Analog inputs (balanced)

    N/A

  • Analog inputs (single-ended)

    N/A

  • Input sensitivity (mV)

    N/A

  • Input impedance (balanced) (Ω)

    N/A

  • Input impedance (single-ended) (Ω)

    N/A

  • Output impedance (balanced) (Ω)

    N/A

  • Output impedance (single-ended) (Ω)

    N/A

  • D/A conversion

    N/A

  • Phono MM/MC current-sensing input impedance (Ω)

    N/A

  • Output power (8Ω) (W)

    10

  • Output power (4Ω) (W)

    N/A

  • Gain (dBu)

    N/A

  • Frequency response low +/- 3dB (Hz)

    5

  • Frequency response high +/- 3dB (Hz)

    60 000

  • Signal to Noise Ratio (dB)

    92

  • Total Harmonic Distortion + Noise (%)

    0.02

  • Damping factor

    N/A

  • Dimensions (mm)

    160 x 42.50 x 96.60

  • Weight (kg)

    0.625

  • Official link

More components