Hifiverse

Integrated amplifiers - WLM Amadeus

Description, images, technical data and specifications

WLM Amadeus
Image source - (c) WLM

The Amadeus is an integrated amplifier from WLM, Wiener Lautsprecher Manufaktur, the Austrian company led by Hannes Frick and known mainly for its loudspeakers. WLM names it the top model of its amplifier line. It combines a preamplifier section with all the features of the WLM Anton reference preamplifier and Class D power stages that correspond technically to the WLM Johann monoblocks. Built in are a phono preamplifier for MM and MC cartridges, a Bluetooth receiver and a headphone amplifier.

Key specs that matter

Rated output is 2 x 1,175 W into 4 ohms (1% THD+N, 1 kHz). Inputs are one XLR, three RCA, Bluetooth and two phono inputs, each switchable between MM and MC. The phono stage offers variable RIAA equalisation curves. Front-panel controls include a 30° harmonic switch at 8 kHz, a 45° harmonic switch at 10 kHz, a +3 dB bass switch at 25 Hz, a bass contour switch at 25 Hz and 50 Hz and a bass contour adjustment of +6 dB at the same frequencies. A headphone output, the RIAA selector and an output on/off switch are also on the front panel.

Engineering and use context

From input to output the Amadeus is fully symmetrical. Its preamplifier section is analogue and, like the whole unit, hand-wired. Like the preamplifier, the power stages are fully balanced.

Both harmonic switches are toggle switches for an optional analogue correction network acting on phase rotation in the high-frequency range. In the bass range WLM uses analogue filters. With the bass contour switch engaged, the equalisation curve is adjusted at these frequencies, and the contour adjustment raises the level over that range. WLM states that all of these adjustments are analogue, with no DSP in the signal path. Its Bluetooth receiver is intended for the wireless transmission of stored music.

Pairing

The two phono inputs allow two turntables or two tonearms with MM or MC cartridges. A balanced source connects to the XLR input. Loudspeakers with a nominal impedance of 4 ohms are within the rated load.

Alternatives

The WLM Josef is the brand's other integrated amplifier, built in direct technical relation to the Amadeus.

Specifications

  • Model name

    Amadeus

  • Type

    Integrated Amplifier

  • Analog inputs (balanced)

    1

  • Analog inputs (single-ended)

    3 + 2 Phono

  • Input sensitivity (mV)

    N/A

  • Input impedance (balanced) (Ω)

    N/A

  • Input impedance (single-ended) (Ω)

    N/A

  • Output impedance (balanced) (Ω)

    N/A

  • Output impedance (single-ended) (Ω)

    N/A

  • D/A conversion

    Yes

  • Phono MM/MC current-sensing input impedance (Ω)

    N/A

  • Output power (8Ω) (W)

    N/A

  • Output power (4Ω) (W)

    2 x 1175

  • Gain (dBu)

    N/A

  • Frequency response low +/- 3dB (Hz)

    N/A

  • Frequency response high +/- 3dB (Hz)

    N/A

  • Signal to Noise Ratio (dB)

    N/A

  • Total Harmonic Distortion + Noise (%)

    N/A

  • Damping factor

    N/A

  • Dimensions (mm)

    N/A

  • Weight (kg)

    N/A

  • Official link