Hifiverse

Integrated amplifiers — Cyrus Audio 40 AMP

Description, images, technical data and specifications

Cyrus Audio 40 AMP
Image source - (c) Cyrus Audio

The 40 AMP is an integrated amplifier from Cyrus Audio that brings together a stereo power amplifier, preamplifier, 32-bit DAC and MM phono section in a single 40 series case. It is housed in anodised aluminium and carries a 127 mm high-resolution colour TFT display on the front. According to Cyrus, its central circuit was designed entirely by the company's own R&D team. A five-year warranty applies.

Key specs that matter

Rated output is 2 x 100 W into 6 ohm, rising to 2 x 113 W into the same load when the optional 40 PSU is connected. THD+N is below 0.002% at 1 kHz and two-thirds power into 8 ohm, signal-to-noise reaches 105 dBA, and the analogue inputs present 28 kOhm with a sensitivity of 237 mV. Conversion relies on the ESS Sabre ES9039Q2M chipset, reworked by Cyrus, with eight selectable DAC filters. The coaxial and optical inputs accept 16/44.1 to 24/192, while the USB-B input runs from 16/44.1 up to 32/384. The chassis measures 88 x 220 x 385 mm, height first, and weighs 8.5 kg.

Engineering and use context

On the rear there are four analogue line inputs, one MM phono input, a single optical plus two coaxial inputs, an asynchronous USB-B port and an HDMI eARC input, so a television can be routed through the amplifier. The low-noise phono stage inherits many of its design features from the Cyrus Classic PHONO. Outputs comprise a variable preamplifier feed, a fixed line feed and a 3.5 mm headphone socket. The line stage itself is specified at below 0.001% THD and above 113 dBA signal-to-noise at full digital scale. An RJ45 Ethernet socket and a USB-A port serve only to load new firmware. The supplied remote handset has a backlit keypad. Auto-standby is adjustable, with a default of 20 minutes, standby draw is under 0.5 W, and maximum power consumption is 500 W.

Pairing

Vinyl playback needs only a deck with an MM cartridge plugged into the phono socket, without a separate phono preamplifier, while a disc transport, network streamer or computer can feed the digital sockets directly. The preamplifier output leaves room to add a separate power amplifier later, and the fixed output delivers a line signal that does not follow the volume setting. The 40 PSU is the dedicated supply upgrade, joined to the amplifier by a single cable, with all of its output voltages digitally controlled.

Alternatives

The Cyrus 80 AMP is an integrated amplifier with built-in streaming and a Class A/B output stage rated at 150 W per channel.

Specifications

  • Model name

    40 AMP

  • Type

    Integrated AMP with DAC and MM Phono Stage

  • Analog inputs (balanced)

    0

  • Analog inputs (single-ended)

    4 + 1 (Phono)

  • Input sensitivity (mV)

    N/A

  • Input impedance (balanced) (Ω)

    N/A

  • Input impedance (single-ended) (Ω)

    N/A

  • Output impedance (balanced) (Ω)

    N/A

  • Output impedance (single-ended) (Ω)

    N/A

  • D/A conversion

    N/A

  • Phono MM/MC current-sensing input impedance (Ω)

    N/A

  • Output power (8Ω) (W)

    2 х 100 (6Ω)

  • Output power (4Ω) (W)

    N/A

  • Gain (dBu)

    N/A

  • Frequency response low +/- 3dB (Hz)

    N/A

  • Frequency response high +/- 3dB (Hz)

    N/A

  • Signal to Noise Ratio (dB)

    N/A

  • Total Harmonic Distortion + Noise (%)

    N/A

  • Damping factor

    N/A

  • Dimensions (mm)

    88 x 220 x 385

  • Weight (kg)

    8.5

  • Official link

Related content

More components