Hifiverse

Plattenspieler - Pro-Ject X2 B

Beschreibung, Bilder, technische Daten und Spezifikationen

Pro-Ject X2 B
Bildquelle - (c) Pro-Ject

The X2 B is a belt-drive turntable of the Pro-Ject Audio Systems X-Line and is equipped with Pro-Ject's True Balanced Connection. It comes with an Ortofon Quintet Red MC cartridge factory aligned. According to Pro-Ject, the balanced concept is aimed at electromagnetic fields from wireless networks and other electronic devices in the home that can interfere with the turntable signal. The deck is made in Europe and is offered in High Gloss, Satin and Real Wood finishes.

Key specs that matter

Speeds are 33, 45 and 78 rpm with electronic speed change. Speed variance is 0.25% at 33 rpm and 0.20% at 45 rpm, wow and flutter is 0.12% and 0.10%, and signal-to-noise ratio is 70 dB. Its acrylic platter is 30 mm thick and weighs 2 kg, on a stainless steel and brass main bearing. A carbon and aluminium sandwich tonearm has an effective length of 230 mm, an overhang of 18 mm and an effective mass of 13.5 g, with a tracking force range of 0 - 30 mN. Outputs are mini XLR and RCA. Power comes from a 15 V DC, 0.8 A supply, and consumption is 4.5 W maximum and 0.3 W in standby. Dimensions are 460 x 150 x 340 mm (W x H x D) and weight is 10 kg.

Engineering and use context

Pro-Ject describes a phono cartridge as a balanced signal transducer by nature and says a single-ended RCA connection throws away half of the usable signal. Because of the internal wiring of MM cartridges, an MC cartridge is needed to use the whole balanced signal. Supplied with the deck is the semi-balanced Connect it Phono E RCA cable, and a fully balanced mini XLR to mini XLR cable is available separately.

Compared with the X1 B, the arm is longer and has a wider tube diameter. Its sandwich construction gives better internal damping, and the higher mass suits low-compliance MC cartridges. The arm tube is one piece with no headshell, azimuth and VTA are adjustable, and the counterweight is TPE-damped.

A DC/AC generator board powers the motor. The motor chassis is balanced and suspended on a TPE belt, decoupling it from the main plinth. Three height-adjustable damped aluminium feet reduce the risk of acoustic feedback. A dust cover and a felt mat are included.

Pairing

A phono stage with an MC input is required. Fully balanced operation requires a balanced phono stage such as the Pro-Ject Phono Box S3 B or Phono Box DS3 B and a balanced mini XLR cable.

Alternatives

The Pro-Ject X1 B is the smaller balanced X-Line turntable, supplied with a pre-adjusted Pick it PRO Balanced cartridge.

Spezifikationen

  • Modellbezeichnung

    X2 B

  • Geschwindigkeit

    33/45/78

  • Antrieb

    Belt

  • Subchassis/Aufhängung

    N/A

  • Tonarm vorinstalliert

    Ja

  • Tonarmmodell

    N/A

  • Tonabnehmer vorinstalliert

    Ja

  • Tonabnehmermodell

    Ortofon Quintet Red

  • Plattenteller

    30mm thick, 2 kg heavy acryl

  • Motor

    DC

  • Gleichlaufschwankungen (%)

    0.12 (33 rpm) / 0.10 (45 rpm)

  • Signal-Rausch-Abstand (dB)

    70

  • Rumpelgeräusch (-dB)

    N/A

  • Abmessungen (mm)

    460 x 150 x 340

  • Gewicht (kg)

    10

  • Offizieller Link