Hifiverse

Plattenspieler - Pro-Ject 6PerspeX Balanced

Beschreibung, Bilder, technische Daten und Spezifikationen

Pro-Ject 6PerspeX Balanced
Bildquelle - (c) Pro-Ject

The 6PerspeX Balanced is a belt-drive high-end turntable from Pro-Ject Audio Systems, handmade in Europe. A transparent acrylic plinth carries a Corian sub-chassis on magnetic suspension, the EVO 9 CC carbon tonearm is pre-mounted, and the Pick it MC3 moving-coil cartridge comes pre-adjusted. Pro-Ject calls the balanced output its True Balanced Connection. MSRP was EUR 2,390 including VAT without cartridge and EUR 2,799 with the Pick it MC3.

Key specs that matter

Speeds are 33 and 45 rpm with electronic speed change. The platter is an MDF/vinyl sandwich of 300 mm diameter, on an inverted main bearing of stainless steel and a ceramic ball. Wow and flutter is ±0.1%, speed drift is ±0.06% and signal-to-noise ratio is 73 dB. Effective arm length is 230 mm, effective arm mass is 8.0 g and overhang is 18 mm. Tracking force range is 10 - 35 mN, and the supplied counterweights cover cartridges of 5 - 14 g. Outputs are RCA phono and a 5-pin mini XLR. Power comes from an external 15 V DC / 800 mA supply for 110/120 or 230/240 V at 50 or 60 Hz, and consumption is 6 W maximum and below 0.3 W in standby. Dimensions are 460 x 183 x 365 mm (W x H x D), and net weight is 11.0 kg.

Engineering and use context

Three individually height-adjustable, TPE-damped aluminium cones support the plinth, which carries the motor and the sub-chassis. The Corian sub-chassis rests on three magnetic fields. Pro-Ject states that this magnetic suspension avoids the parasitic noise of a conventional spring mechanism. An AC motor drives the outside edge of the platter via a belt. Inside the turntable, a precision DC-driven AC generator produces a new sine wave to power the motor and gives electronic speed change. A vinyl layer on the sandwich platter forms the record surface.

Its EVO 9 CC tonearm uses an inverted cardanic bearing of ABEC 7 quality with four stainless steel tips. Both azimuth and vertical tracking angle (VTA) are adjustable on the full aluminium tonearm base. The anti-skating mechanism adjusts to the skating force between the outer and inner grooves, and a TPE insert decouples the counterweight from the arm tube to reduce resonances. A Connect it Phono E RCA cable with copper conductors is included. The Power Box S3 Phono is the optional power supply upgrade, with two outputs for a Pro-Ject turntable and phono preamplifier.

Pairing

A phono stage with an MC input is required. For the balanced output, the matching phono stages are the Phono Box S3 B, Phono Box DS3 B and Tube Box DS3 B, connected with a True Balanced cable.

Alternatives

The Debut PRO B is a lower-priced Pro-Ject turntable with a balanced mini XLR output.

Spezifikationen

  • Modellbezeichnung

    6PerspeX Balanced

  • Geschwindigkeit

    33/45

  • Antrieb

    Belt

  • Subchassis/Aufhängung

    N/A

  • Tonarm vorinstalliert

    Ja

  • Tonarmmodell

    N/A

  • Tonabnehmer vorinstalliert

    Ja

  • Tonabnehmermodell

    Pick it MC3

  • Plattenteller

    MDF/vinyl Sandwich (300mm diameter)

  • Motor

    AC

  • Gleichlaufschwankungen (%)

    N/A

  • Signal-Rausch-Abstand (dB)

    73

  • Rumpelgeräusch (-dB)

    N/A

  • Abmessungen (mm)

    460 x 183 x 365

  • Gewicht (kg)

    11

  • Offizieller Link