Pro-Ject Audio Systems of Austria introduced the belt-drive Debut Carbon EVO in 2020 as the next generation of its Debut line, after the original Debut of 1998 and the Debut Carbon of the early 2010s. Pro-Ject counts close to 1 million Debut units sold. The EVO is now listed in the maker's archive of discontinued models. It comes with a pre-adjusted Ortofon 2M Red moving-magnet cartridge, and the US version carries a Sumiko Rainier.
Key specs that matter
Speeds are 33 and 45 rpm with electronic speed change, and 78 rpm with the supplied round belt. The platter is a 300 mm, 1.7 kg steel platter with TPE damping and a felt mat, running on a stainless steel axle in a bronze bushing. Wow and flutter is ±0.17% at 33 rpm and ±0.15% at 45 rpm, and speed drift is ±0.5% and ±0.6%. Signal-to-noise ratio is 68 dB. Its 8.6-inch one-piece carbon tonearm has an effective length of 218.5 mm, an effective mass of 6.0 g and an overhang of 18.5 mm. Power comes from a 15 V DC, 0.8 A outboard supply, and consumption is 4 W in use and 0 W in standby. Dimensions are 415 x 113 x 320 mm (W x H x D), and net weight is 6 kg.
Engineering and use context
A TPE (thermoplastic elastomer) ring is mounted to the inside of the platter rim. Pro-Ject states that it damps the resonance of the metal platter, raises its weight and adds a flywheel effect, with less wow and flutter as the result. The motor sits in a redesigned suspension that decouples it from the plinth, drawing on TPE damping and high-mass sandwich constructions from the company's high-end turntables.
Three height-adjustable damped aluminium feet replace the four damped plastic feet of earlier Debut models. The speed control switch is on the bottom of the plinth, so the top carries no button or printing. Arm and headshell are one piece, a design Pro-Ject uses to prevent unwanted resonances. Its MDF plinth came in eight hand-painted finishes - gloss black, white and red, and satin black, white, golden yellow, steel blue and fir green - or in real walnut veneer. A phono stage, Bluetooth and USB were deliberately left out. Outputs are gold-plated RCA sockets. In the box are an adjustable acrylic dust cover, an adapter for 7-inch singles and a Connect it E semi-balanced, low-capacitance phono cable.
Pairing
The 2M Red has an output of 5.5 mV and a recommended load of 47 kohms. A phono stage with an MM input is required. Shellac records require an Ortofon 2M 78 stylus, not included, together with the round belt.
Alternatives
The Pro-Ject Debut EVO 2 is the next-generation Debut belt-drive turntable, with a TPE-damped die-cast aluminium platter.