Hifiverse

Plattenspieler - Audio Note TT-Two Deluxe

Beschreibung, Bilder, technische Daten und Spezifikationen

Audio Note TT-Two Deluxe
Bildquelle - (c) Audio Note

The TT-Two Deluxe is a belt-drive turntable from Audio Note (UK) with two opposed AC motors. Audio Note built it as a step beyond the TT-One, particularly for use with one of its own tonearms. Its plinth is made from selected void-free Finnish birch ply, made in the same Austrian factory as the Audio Note loudspeaker cabinets.

Key specs that matter

Each 24-pole precision, high-torque motor is mounted on an anti-vibration assembly. Speeds are 33 and 45 rpm, and the drive is a precision moulded, round-section rubber belt. Power source is 240 V 50 Hz or 110 V 60 Hz, depending on country, and power consumption is 3.3 VA. The spindle to pivot distance is 220 mm. Dimensions are 170 x 470 x 360 mm (H x W x D), including feet and lid.

Engineering and use context

All Audio Note turntables follow four principles. A suspended chassis attenuates vibration energy from the speakers and the room, a low-mass platter absorbs less energy from the cartridge, a high-torque AC drive holds constant platter speed through strongly modulated grooves, and materials with different resonances and mass lead energy away from the cartridge.

Here the suspension is a three-point design with steel coil springs working in extension rather than compression. They carry a dynamically centred aluminium sub-chassis with optimised three-point suspension geometry. This system isolates the platter, tonearm, cartridge and record from exterior vibrations. According to Audio Note, the two opposed AC motors deliver twice the torque to the low-mass acrylic platter and further stabilise the suspension. Its bearing uses a sintered and polished shaft in a brass tube, a hardened thrust plate and a precision ground steel ball, and it is oil-charged at the factory.

Speed change is manual. The platter is lifted off and the belt is moved to the other pulley groove, on the same groove of both motor pulleys. Audio Note copper foil capacitors are used in the internal power supply, and the external Deluxe PSU is sold separately for the TT-One and TT-Two Deluxe. Standard veneers are Black Ash, Rosewood and Cherry, with satin or high gloss paint and other loudspeaker veneers at extra cost.

Pairing

A tonearm, a cartridge and a phono stage are required. The suspension is designed for the medium-mass Audio Note tonearms - ARM-One/II, ARM-Two/II and ARM-Three/II. Armboards for other tonearms are available, but higher-mass arms are not recommended.

Alternatives

The Audio Note (UK) TT-Three is the turntable above the TT-Two Deluxe in the range, followed by the TT Three Reference.

Spezifikationen

  • Modellbezeichnung

    TT-Two Deluxe

  • Geschwindigkeit

    33/45

  • Antrieb

    Belt

  • Subchassis/Aufhängung

    N/A

  • Tonarm vorinstalliert

    k. A.

  • Tonarmmodell

    N/A

  • Tonabnehmer vorinstalliert

    k. A.

  • Tonabnehmermodell

    N/A

  • Plattenteller

    Acrylic

  • Motor

    AC

  • Gleichlaufschwankungen (%)

    N/A

  • Signal-Rausch-Abstand (dB)

    N/A

  • Rumpelgeräusch (-dB)

    N/A

  • Abmessungen (mm)

    170 x 470 x 360

  • Gewicht (kg)

    N/A

  • Offizieller Link

Weitere Komponenten